7.Key System Functions
7.21.5 To delete the greeting
1)Press TALK ( 
) button.
2)Press PROGRAM ( 
) button longer than 1 second.
3)Press 
.
7.21.6 To record a paging message
1)Press TALK (
) button.
2)Press PROGRAM ( 
) button longer than 1 second.
3)Press 
.
4)Press # to start recording.
5)Press PROGRAM ( 
) button longer than 1 second or END (
) button.
Caution
This feature should be programmed at the admin station before using.
7.21.7 To delete a paging message
1)Press TALK ( 
) button.
2)Press PROGRAM ( 
) button longer than 1 second.
3)Press 
.
7.22 Date/Time Display
* This feature is not available in
1)Press TALK (
) button.
2)Press PROGRAM ( 
) button longer than 1 second.
3)Press 
.
7.23 Linked Station Pairs
Two stations can be linked with each other by programming. When two stations are linked, the following functions are supported;
1)When a station is busy, the other idle linked station will not receive ring for CO lines, transferred ring or ICM calls.
2)If one of two linked stations receives ICM/DISA/DID calls, then the other linked station will receive ring together.
3)If any one station in a linked pair goes to DND state or
4)If one of two linked station is busy, the LCD of the other station will display “IN USE AT LINK”.
5)If you have set DND function, you should be sure that the wireless terminal be in DND state by pressing TALK ( ) button after setting DND function. Otherwise, because the system sends setting information related to message of the wireless terminal about every 3 minute, you should wait about 3 minutes. When you canceled DND function, you should be sure that the wireless terminal be not in DND state by pressing TALK ( ) button after canceling DND function for the same reason, too.
58