4.BASIC FUNCTIONS
4.3.2 Post Dial
1)
→ CO Line Access Code (9, 8+XX or 88+XX) → Phone number → Connection ; (XX means CO line number).
2)
→ CO Line Access Code (9,8+XX or 88+XXX) → Phone number →Connection ; (XX means CO Group Number, XXX means CO line number).
You may dial telephone number after pressing TALK ( 
) button. When pressing CO line access code (9, 8 + XX, or 88 + XX), CO line dial tone is heard. Every time pressing each button, it is displayed on the LCD. If you dial a number late, “DIALING TOO LATE” message is displayed on the LCD.
Note
In case of
zPress 
button. Connection tone is heard and phone( 
) icon is displayed on the LCD.
zDial CO line access code.
Î
Î
zDial the desired phone number.
4.3.3Call Release
To release a call, press END ( 
) button. The phone( 
) icon will be disappeared and the wireless terminal will goes to an idle state.
4.3.4 Assign CO Line/CO Line Group
Available CO lines can be grouped and the accessible CO line groups can be assigned to a station by Admin programming (For detail programming, refer to “CO LINE GROUPS” and “CO LINE ACCESS” of “Digital Key Telephone System Programming Manual”). All available CO lines are assigned to Group 01 by default.
Accessing a CO line is done in three ways as above; (9, 8+CO line group # or 88+CO line #) and they are;
1)9 (CO line Access Code): Connect an available CO line of the assigned CO line group to the station. CO line selecting method is programmable by Admin programming.
2)8 + CO line group #: Connect an available CO line of the CO line group. The CO line group should be assigned to the station before by Admin programming. CO line selecting method is programmable by Admin programming.
3)88 + CO line #: Connect the CO line directly. The CO line should be allowed to the station before by Admin programming.
28