LG Electronics GDC-400 user manual At the Wireless Terminal

9. Installation of Wireless Terminal

9.4 De-subscription II

There is another way to de-subscribe locally. The subscription data of the phone (stored in MPB and WTIB or the wireless terminal) should be erased separately at both sides by 9.3 de- subscriptionⅠ procedure. But you lost a phone or MPB and WTIB by accident, you can use this procedure. Then, you should be more careful in doing this procedure. It is because this procedure is for abnormal case.

To De-subscribe users locally in the system

At the Attendant Station

To de-subscribe all of subscribed wireless terminal at once,

TRANS/PGM + 0 #+ Flex. Button 7 + Password (147*) +

HOLD/SAVE

Please, refer to ‘Installation & Maintenance Manual’ about “Password” in detail.

To de-subscribe one subscribed wireless terminal,
TRANS/PGM + 0 # + Flex. Button 8 + Station No +	HOLD/SAVE

1)Press [TRANS/PGM], then it will be the User Programming Mode(you will see the flashing [TRANS/PGM] LED (60 IPM Flash) and [MON] LED on ).

2)Press 0#.

3)Press Flexible button 7 or 8.

4)Enter password or a station number.

5)Press [HOLD/SAVE] button, and confirmation tone is heard.

To De-subscribe locally in the wireless terminal

At the Wireless Terminal

Menu ( ) + Select Phone Register menu + Select Subscription + Select BASE to erase + R/C for longer than 1 second + OK ( )

1)Press Menu ( ) button.

2)Main Menu is displayed on the LCD.

3) Select Phone Register menu by pressing Navigation (	) button and OK (	)
button.

4)Phone Register menu is displayed on the LCD.

5)Select “Subscription” by pressing UP/ DOWN( ) button and OK ( ) button.

6)Select BASE number to erase and press R/C () button for longer than 1 second.

7)If you sure to erase, press OK ( ) button.

8)If local desubscription is completed, phone goes to previous menu.

64