7.Key System Functions
7.20 Programming User Custom Message
A user may program a custom message to be displayed on the LCD of calling terminal.
1)Press TALK ( 
) button.
2)Press PROGRAM ( 
) button longer than 1 second.
3)Press 
.
4)(Confirmation tone will be heard.)
5)Enter the message. (Up to 10 letters can be entered by using codes shown in the above “Programming A Name Into Display”)
6) Press PROGRAM ( | ) button longer than 1 second. (Confirmation tone will be |
heard.)
7.21 Functions Related with VMIB
7.21.1 Date & Time Prompt:
1)Press TALK ( 
) button.
2) Press PROGRAM ( ) button longer than 1 second.
3)Press 
.
7.21.2 Station Number Prompt
1)Press TALK (
) button.
2)Press PROGRAM ( 
) button longer than 1 second.
3)Press 
.
7.21.3 Station status prompt
1)Press TALK ( ) button.
2) Press PROGRAM ( ) button longer than 1 second.
3)Press 
.
zA user will hear below items,
ÎStation number XXXX
ÎListed message X
Î
ÎDo not disturb
ÎForwarded to station XXXX
ÎForwarded to speed bin/STA/HUNT XXX
ÎLocked (temporary COS change)
ÎCOS X
7.21.4 To record a greeting
1)Press TALK (
) button.
2)Press PROGRAM ( 
) button longer than 1 second.
3)Press 
.
4)Press # to start recording.
5)Press PROGRAM ( 
) button longer than 1 second or END ( 
) button.
57