LG Electronics GDC-400 user manual Redial, Trans, Program, Speed, Hold

Appendix

FEATURE

INPUT KEY

		Delete Greeting				TALK(	) + [PROGRAM] + 6 + 6
		Delete Paging Message				TALK(	) + [PROGRAM] + 6 + 7
Universal Night Answer		TALK(	) + 5 + 6 + 9
CO Line Access		TALK(	)+8+digit(ipLDK-300/300E : 01~72. ipLDK-100 :01~24,
		ipLDK-24: 01~08)
Individual CO Line Access		TALK(	) + 8 + 8 + digit (ipLDK-300 : 001~200, ipLDK-300E :
		001~400, ipLDK-100 : 01~40, ipLDK-24:01~12 )
Station Speed Dial		TALK(	) + [SPEED] + digit (000~099)
		Saved Number		TALK(	) + [SPEED] + #
Redial				1. TALK(	) + [SPEED] + * or [REDIAL]
		Last Number		(This case is available only for CO line call.)
				2. UP/DOWN] ( or			)
				3. HOLD
Last Tel. Number Display		TALK(	) + [SPEED] + *
Saved Tel. Number Display		TALK(	) + [SPEED] + #
		Set function		TALK(	) + [PROGRAM] + 4 + 1 + Time(hh:mm) +
Wake-Up Call				(# for permanent use) + [PROGRAM]
		Reset function		TALK(	) + [PROGRAM] + 4 + 2 + [PROGRAM]
		Register		TALK(	) + [PROGRAM] + 3 + 1 + Password
Authorization Code				(5digits) + [PROGRAM]
(Password)		Change		TALK(	) + [PROGRAM] + 3 + 2 + The current
				Password (5digits) + New password + [PROGRAM]
Temporal Station COS		Change		TALK(	) + [PROGRAM] + 2 + 1 + [PROGRAM]
Change (a password is necessary
		Recovery		TALK(	) + [PROGRAM] + 2 + 2 + The current
for this function)
				Password (5 digits) + [PROGRAM]
Programming User Custom		TALK(	) + [PROGRAM] + 5 + 2 + Input Message(within 23
Message		characters) + [PROGRAM]
Pre-Selected Message Display		TALK(	) + [PROGRAM] + 5 + 1 + Digits(00~19, #) + [PROGRAM]
Programming A Name Into		TALK(	) + [PROGRAM] + 7 + 4 + Station Name + [PROGRAM] +
Display		END(	)
Call-by-Name		TALK(	) + [SPEED] + [SPEED]
Save Last Tel. Number	(During a call) [SPEED] + [SPEED]
Entering CLI Message		TALK(	) + [CALL BACK] + [UP/DOWN]
Display
Clear CLI Message Display		TALK(	) + [CALL BACK] + [UP/DOWN] + [FLASH](C/R)

Note

REDIAL	: Press	button.
UP/DOWN	: Press	button.
TRANS	: Press	button shorter than 1 second.
PROGRAM	: Press	button longer than 1 second.
SPEED	: Press	button shorter than 1 second.
CALL BACK	: Press	button.
HOLD	: Press	button longer than 1 second.

72