9. Installation of Wireless Terminal
9.5 Authentication
The process by which the identity of a user of the wireless terminal is checked by the system. The User Personal Identification (UPI), manually entered by a user, is used for user authentication.
To Authenticate a User
At the Attendant Station
TRANS/PGM
+ 0 # + Flex. Button 5 + Station No +
HOLD/SAVE
1)Press [TRANS/PGM], then it will be the User Programming Mode (A user will see the flashing [TRANS/PGM] LED (60 IPM Flash) and [MON] LED on ).
2)Press “0 #’ (‘0 #’ in
3)Press Flexible button 5.
4)Enter a station number to be authenticated.
5)Press [HOLD/SAVE] button and confirmation tone is heard.
At the Wireless Terminal
When the attendant presses [HOLD/SAVE], a message for authentication will be displayed on the wireless terminal with confirmation tone.
UPI (5 digit) +
OK
1)Enter
2)Press OK( 
) Button longer than 1 second.
3)Authentication result (fail or success) will be informed on the attendant's LCD with confirmation tone.
9.6 Change of Subscribed System
The wireless terminal may have subscription information for 4 systems at the same time. The last subscribed system information or the subscribed system information which is selected as the following steps is only available system information currently.
1)Press Menu ( 
) button.
2)The main menu is displayed on the LCD.
3)Select Phone Register menu by pressing Navigation ( 
) button.
4)Select ‘Base Choice’ menu by pressing UP/DOWN ( 
) button.
5)The cursor is located at the current base number are displayed on the LCD.
6)If necessary, press UP/DOWN ( 
) button to select Base number and press OK ( 
) button when the base number that a user want to use is displayed on the LCD.
7)And then, the wireless terminal searches for the selected system.
65