Sharp DK-KP95PH operation manual Direct wireless connection, Dlna

Setting the clock (Remote control only) Wi-Fi network Setup for AirPlay / DLNA

In this example, the clock is set for the 24-hour (0:00) display.

1Press the ON/STAND-BY button to turn the power on.

2Press the CLOCK/TIMER button.

3Within 5 seconds, press the ENTER button. To adjust the

day, press the or button and then press the ENTER button.

4Press the or button to select 24-hour or 12-hour display and then press the ENTER button.

The 24-hour display will appear.

(0:00 - 23:59)

The 12-hour display will appear.

(AM 12:00 - PM 11:59)

The 12-hour display will appear.

(AM 0:00 - PM 11:59)

5To adjust the hour, press the or button and then

press the ENTER button. Press the or button once to advance the time by 1 hour. Hold it down to advance continuously.

6To adjust the minutes, press the or button and

then press the ENTER button. Press the or button once to advance the time by 1 minute. Hold it down to advance the time by 5 minutes interval.

To confirm the time display:

Press the CLOCK/TIMER button. The time display will appear for about 5 seconds.

Note:

When power supply is restored after unit is plugged in again or after a power failure, reset the clock.

To readjust the clock:

Perform “Setting the clock” from step 1. If the “Clock” does not appear in step 2, step 4 (for selecting the 24-hour or 12-hour display) will be skipped.

To change the 24-hour or 12-hour display:

1Clear all the programmed contents. [Refer to “Factory reset, clearing all memory” on page 21 for details.]

2Perform “Setting the clock” from step 1 onwards.

(AirPlay)

With Apple AirPlay technology, you can stream your music from your iTunes on a Mac, PC, iPhone, iPod touch, or iPad to external speakers (DK-KP95PH) via a Wi-Fi network.

AirPlay usage requires:

●MacBook or MacBook Pro running MacOS 10.6.6 or greater.

●iTunes 10.2 or greater (Mac/PC).

●iOS 4.3 or later

-iPod touch (4th, 3rd and 2nd generation)

-iPhone 4

-iPhone 3GS (iPhone 3G cannot support AirPlay)

-iPad 2

-iPad

(DLNA)

DLNA technology enables you to share media from one device to another via a Wi-Fi network.

DLNA usage requires:

●DLNA compatible devices with appropriate application. (Refer to your devices’ manual) Support status varies depending on model and software features such as client and server functions.

●PC with Windows 7.

●DLNA version 1.5

●This product supports audio source with playback capability only. Streaming (audio and video) from DLNA devices is not supported by this product.

●DRM file playback (DTCP-IP) is not supported.

●Sharp does not guarantee that this product will work with all DLNA compatible devices and wireless LAN routers.

Note:

When this unit is placed too near a Wireless LAN device or microwave, noise interference may occur, causing crackling sound. It may also reduce the communication speed and cause invalid connection. If these happen, do the following:

-Place the unit away from the Wireless LAN device or microwave.

-Place the unit closer to the source device.

■Direct wireless connection

1Press the ON/STAND-BY button.

2Press the NETWORK button.

3Press the iPod MENU button on the remote control.

4Press the / button to select ‘Wi-Fi Setup’. Press the ENTER button.

5Press the / button to select ‘Direct’. Press the ENTER button. Wait until ‘ • ’ on the display turns off and shows ‘Direct Ready’ which takes about 40 seconds.

6On the iPod touch/iPhone/iPad, select ‘Settings’ --> ‘Wi-Fi’. On the PC/Mac, enter the list of available wireless networks.

Wi-Fi

SHARP_DK-KP95

For other DLNA compatible devices, turn on the Wi-Fi. For more details, refer to your devices’ manual.

7Select SHARP_DK-KP95from the list of available networks.

E-6