Sharp DK-KP95P Enhancing your system, Sleep operation, To use timer and sleep operation together

Timer and sleep operation (Remote control only) (continued)

8To adjust the minutes, press the or button and then press the ENTER button.

9Set the time to finish as in steps 7 and 8 above.

10Adjust the volume using the VOLUME control, and then press the ENTER button. Do not turn the volume up too high.

11Press the ON/STAND-BY button to enter the power stand-by mode. The “TIMER” indicator lights up and the unit is ready for timer playback.

12 When the preset time is reached, playback will start. The volume will increase gradually until it reaches the preset volume. The timer indicator will blink during timer playback.

13 When the timer end time is reached, the system will enter the power stand-by mode automatically.

Once timer:

The timer will be cancelled.

Daily timer:

The timer operates at the same time every selected day. It will continue until the daily timer setting is cancelled. Cancel the daily timer when it is not in use.

Notes:

●When performing timer playback using another unit connected to the USB terminal or AUDIO IN socket, select “USB” or “AUDIO IN” in step 5.

●This unit will turn on or enter the power stand-by mode automatically. However, the connected unit will not turn on or off. To stop the timer playback, follow step “Cancelling the timer setting” of this page.

Checking the timer setting:

1 Turn the power on and press and hold down the CLOCK/TIMER button.

2Within 10 seconds, press the or button to select “Once” or “Daily”, and press the ENTER button.

3Within 10 seconds, press the or button to select “Timer Call”, and press the ENTER button.

Cancelling the timer setting:

1 Turn the power on and press and hold down the CLOCK/TIMER button.

2Within 10 seconds, press the or button to select “Once” or “Daily”, and press the ENTER button.

3Within 10 seconds, press the or button to select “Timer Off”, and press the ENTER button. Timer will be cancelled (the setting will not be cancelled).

Reusing the memorised timer setting:

The timer setting will be memorised once it is entered. To reuse the same setting, perform the following operations.

1 Turn the power on and press and hold down the CLOCK/TIMER button.

2Within 10 seconds, press the or button to select “Once” or “Daily”, and press the ENTER button.

3Within 10 seconds, press the or button to select “Timer On” , and press the ENTER button.

4Press the ON/STAND-BY button to enter the power stand-by mode.

■Sleep operation

The radio, compact disc, iPod, USB, Audio In, Network can all be turned off automatically.

1Play back the desired sound source.

2Press the SLEEP button.

3Within 5 seconds, press the Numeric button to set the time. (1 minute ~ 99 minutes)

4“SLEEP” will appear.

5The unit will enter the power stand-by mode automatically after the preset time has elapsed. The volume will be turned down 1 minute before the sleep operation finishes.

To confirm the remaining sleep time:

While “SLEEP” is indicated, press the SLEEP button.

To cancel the sleep operation:

Press the ON/STAND-BY button while “SLEEP” is indicated. To cancel the sleep operation without setting the unit to the stand-by mode, proceed as follows.

1While “SLEEP” is indicated, press the SLEEP button.

2Within 5 seconds, press the “0” button twice until “SLEEP 00” appears.

■To use timer and sleep operation together

Sleep and timer playback:

For example, you can fall asleep listening to the radio and wake up to CD in the next morning.

1Set the sleep time (see above, steps 1 - 5).

2While the sleep timer is set, set the timer playback (steps 2 - 9, pages 18 - 19).

Sleep timer		Timer playback		End
setting		setting		time
	1-99 minutes			Desired time
	Sleep operation will		Timer playback
	automatically stop		start time

Enhancing your system

The connection lead is not included. Purchase a commercially available lead as shown below.

Portable audio	Audio cable
player, etc.	(not supplied)

E-19