Sharp DK-KP95PH Connection of an AirPlay device to the same Wi-Fi network, Network Stand-by mode

Wi-Fi network Setup for AirPlay / DLNA (continued)

12 Change the name of SHARP_DK-KP95_xxxxxx in AirPlay Device Name if you like and click Apply (*1).

13Click Apply (*2) at the bottom of the page to apply your settings.

*1

*2

14 Click OK to confirm your settings.

15On the iPod touch/iPhone/iPad, select ‘Settings’ --> ‘Wi-Fi’. On the PC/Mac, enter the list of available wireless networks.

16Select your router from the list of available networks.

17 Continue with step 8 to 9 in ‘Direct wireless connection’ of page 6.

■Connection of an AirPlay device to the same Wi-Fi network

You can add other AirPlay devices to join the same Wi-Fi network as the unit.

1On the iPod touch/iPhone/iPad, select ‘Settings’ --> ‘Wi-Fi’. On the PC/Mac, enter the list of available wireless networks. For other DLNA compatible devices, turn on the Wi-Fi. For more details, refer to your devices’ manual.

2Select your router SSID from the list of available wireless networks.

3 Wait until successful Wi-Fi connection from the additional AirPlay devices to the router.

4Continue with step 8 to 9 in ‘Direct wireless connection’ of page 6.

Notes:

● This product may face some irregularities due to various unforseen reasons from other devices in the process of Wi-Fi pairing. Should this happen, unplug the AC power lead, and plug it back in.

● If the Network function operates incorrectly, do the Network reset (refer page 21).

■Various function control during AirPlay / DLNA Various function can be controlled from the remote control or your AirPlay / DLNA device.

Function	Main unit	Remote	AirPlay
		control	device

Volume up/

down

Play/pause

Next/previous

track

Mute

Display

Notes:

●For DLNA compatible devices, the function control may vary depending on DLNA application used.

●To enable this unit to control iTunes software, the setting below is required.

For Mac iTunes:

1 On the toolbar menu, click iTunes and select

Preferences.

2 Under Devices tab, check the ‘ Allow iTunes audio control from remote control speakers’ box.

For Window iTunes:

1 On the toolbar menu, click Edit and select

Preferences.

2 Under Devices tab, check the ‘ Allow iTunes

control from remote control speakers’ box.

■Network Stand-by mode

On: Network Stand-by mode is enable.

During stand-by mode, if select DK-KP95PH speakers through AirPlay icon and tap/click PLAY on AirPlay device, the unit will automatically power on and stream the music from your AirPlay device.

To enable the Network Stand-by mode :

During Stand-by mode, press DEMO button on remote control to select the Network Stand-by mode on or off.

To check the IP address of the router / Mac ID / SSID:

1Press iPod MENU button on the remote control.

2Press / button on the remote control repeatedly. The display will toggle as below:

Wi-Fi Setup	IP address
SSID	Mac ID
(when using router)

E-8