Weslo WLSY71500 owner manual

Page 23

1/4" Nylon Lock Nut (7)—6

5/16" Jam Nut (2)–8

5/16" x 2" Eyebolt (35)—1

5/16" Nylon Lock Nut (3)–23

1/4" x 3/4" Screw (18)–8

3/8" Jam Nut (6)–6

1/4" x 2 1/2" Screw (43)–2

3/8" Nylon Lock Nut (21)–6

1/4" Flat Washer (10)–4

1/4" x 2" Carriage Bolt (38)–2

5/16" Flat Washer (8)–21

5/16" x 2 1/2" Carriage Bolt (1)–3

3/8" Flat Washer (9)–5

5/16" x 2 3/4" Carriage Bolt (14)–2

Image 23

Contents Customer HOT Line Patent Pending QUESTIONS?Model No. WLSY71500 Serial No Important Precautions Table of ContentsBody Before YOU BeginNuts yet AssemblyAssembly requires two people.Due to the size Following Tools not Included are Required for AssemblyDo not tighten Nylon Lock Nut yet Nuts 3.Do not tighten the Nylon Lock Nuts yetDo not tighten Nylon Lock Nuts yet Lubricate One of the Arms 46. Attach the Handle with a 5/16 Important As you assemble the Long Cable Bracket must be able to swivel freelySwivel Bracket must be able to swivel freely Page Manual Important The Short and Long CablesPage Important If the cables are Switching the Arms to the Press Mode or Butterfly Mode AdjustmentChanging the Weight Setting Tion will vary from the weight settingAttaching the LAT BAR or Nylon Strap to LOW Pulley Station Attaching the LEG Lever to the LOW Pulley StationAttaching the LAT BAR or Nylon Strap to High Pulley Station Tightening the Cables TROUBLE-SHOOTING and MaintenancePart LIST-Model No. WLSY71500 Exploded DRAWING-Model No. WLSY71500 Cable Diagram Page Weslo INC., 1500 S W., LOGAN, UT Ordering Replacement Parts Limited Warranty Remove this Part Identification Sheet from the Manual Inner Cap Round Cap 4 Inner Cap Cover Cap 2 Inner Cap