Weslo WLSY71500 owner manual Cable Diagram

Page 18

CABLE DIAGRAM

The cable diagram below shows the proper routing of the Short Cable (23) and the Long Cable (66). Use the diagram to make sure that the two cables are assembled correctly. The letters show the routing of the Short Cable (23); the numbers show the routing of the Long Cable (66).

2

8—Top Frame

4

1

Long Cable (66)

High Pulley Station

5

7

6

3

C

D—Weight Tube

B

A

Short Cable (23)

Low Pulley Station

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents QUESTIONS? Model No. WLSY71500 Serial NoCustomer HOT Line Patent Pending Table of Contents Important PrecautionsBefore YOU Begin BodyFollowing Tools not Included are Required for Assembly AssemblyAssembly requires two people.Due to the size Nuts yetNuts 3.Do not tighten the Nylon Lock Nuts yet Do not tighten Nylon Lock Nuts yetDo not tighten Nylon Lock Nut yet Lubricate One of the Arms 46. Attach the Handle with a 5/16 Bracket must be able to swivel freely Swivel Bracket must be able to swivel freelyImportant As you assemble the Long Cable Page Important The Short and Long Cables ManualPage Important If the cables are Tion will vary from the weight setting AdjustmentChanging the Weight Setting Switching the Arms to the Press Mode or Butterfly ModeAttaching the LEG Lever to the LOW Pulley Station Attaching the LAT BAR or Nylon Strap to High Pulley StationAttaching the LAT BAR or Nylon Strap to LOW Pulley Station TROUBLE-SHOOTING and Maintenance Tightening the CablesPart LIST-Model No. WLSY71500 Exploded DRAWING-Model No. WLSY71500 Cable Diagram Page Ordering Replacement Parts Limited WarrantyWeslo INC., 1500 S W., LOGAN, UT Remove this Part Identification Sheet from the Manual Inner Cap Round Cap 4 Inner Cap Cover Cap 2 Inner Cap
Top Page Image Contents