Weslo WLSY71500 owner manual Remove this Part Identification Sheet from the Manual

Page 21

REMOVE THIS PART IDENTIFICATION

SHEET FROM THE MANUAL!

This chart is provided to help identify the small parts used in assembly. Some parts come pre-assembled for shipping purposes; if a part cannot be found in the parts bags, check the system frame to make sure it hasn’t come pre-assembled.

The number in parenthesis below each part refers to the key number of the part. The second number refers to the

quantity used in assembly. This side of the chart shows all of the nuts, washers and bolts used in assembly. See the opposite side of this chart for all other parts.

Image 21

Contents QUESTIONS? Model No. WLSY71500 Serial NoCustomer HOT Line Patent Pending Important Precautions Table of ContentsBody Before YOU BeginAssembly requires two people.Due to the size AssemblyFollowing Tools not Included are Required for Assembly Nuts yetNuts 3.Do not tighten the Nylon Lock Nuts yet Do not tighten Nylon Lock Nuts yetDo not tighten Nylon Lock Nut yet Lubricate One of the Arms 46. Attach the Handle with a 5/16 Bracket must be able to swivel freely Swivel Bracket must be able to swivel freelyImportant As you assemble the Long Cable Page Manual Important The Short and Long CablesPage Important If the cables are Changing the Weight Setting AdjustmentTion will vary from the weight setting Switching the Arms to the Press Mode or Butterfly ModeAttaching the LEG Lever to the LOW Pulley Station Attaching the LAT BAR or Nylon Strap to High Pulley StationAttaching the LAT BAR or Nylon Strap to LOW Pulley Station Tightening the Cables TROUBLE-SHOOTING and MaintenancePart LIST-Model No. WLSY71500 Exploded DRAWING-Model No. WLSY71500 Cable Diagram Page Ordering Replacement Parts Limited WarrantyWeslo INC., 1500 S W., LOGAN, UT Remove this Part Identification Sheet from the Manual Inner Cap Round Cap 4 Inner Cap Cover Cap 2 Inner Cap