Weslo WLSY71500 owner manual

Page 24

5/16" x 1 1/2" Bolt (24)–2

3/8" x 1 3/4" Bolt (12)–7

5/16" x 2" Bolt (61)–1

5/16" x 2 1/4" Bolt (33)–5

3/8" x 2 1/2" Bolt (62)–2

5/16" x 2 3/4" Bolt (11)–10

3/8" x 2 3/4" Bolt (70)–1

5/16" x 3" Bolt (17)–2

5/16" x 3 1/4" Bolt (76)–1

5/16" x 3 1/2" Bolt (87)–1

5/16" x 6" Bolt (74)–1

1/2" x 1/2" Spacer (65)—2

1/2" x 3/8" Spacer (51)—2

1" Spacer (22)—1

1" Plastic Stop (64)–1

1" Retainer (54)–4

Image 24

Contents QUESTIONS? Model No. WLSY71500 Serial NoCustomer HOT Line Patent Pending Table of Contents Important PrecautionsBefore YOU Begin BodyAssembly Assembly requires two people.Due to the sizeFollowing Tools not Included are Required for Assembly Nuts yetNuts 3.Do not tighten the Nylon Lock Nuts yet Do not tighten Nylon Lock Nuts yetDo not tighten Nylon Lock Nut yet Lubricate One of the Arms 46. Attach the Handle with a 5/16 Bracket must be able to swivel freely Swivel Bracket must be able to swivel freelyImportant As you assemble the Long Cable Page Important The Short and Long Cables ManualPage Important If the cables are Adjustment Changing the Weight SettingTion will vary from the weight setting Switching the Arms to the Press Mode or Butterfly ModeAttaching the LEG Lever to the LOW Pulley Station Attaching the LAT BAR or Nylon Strap to High Pulley StationAttaching the LAT BAR or Nylon Strap to LOW Pulley Station TROUBLE-SHOOTING and Maintenance Tightening the CablesPart LIST-Model No. WLSY71500 Exploded DRAWING-Model No. WLSY71500 Cable Diagram Page Ordering Replacement Parts Limited WarrantyWeslo INC., 1500 S W., LOGAN, UT Remove this Part Identification Sheet from the Manual Inner Cap Round Cap 4 Inner Cap Cover Cap 2 Inner Cap