Weslo 1750 Assembly, Arrow a while pushing on the Handrail to slide it fully, Screws Post 101

Assembly

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Assembly

requires a phillips screwdriver and an adjustable wrench (not included).

1. With the help of a second person, carefully raise the Uprights (70) until the Wheels (30) are resting flat on the floor.

2.Slide the upper end of a Handrail (101) onto the post on

the left Upright (70). Note: It will be necessary to pivot the Handrail to the side and back repeatedly (see

arrow A) while pushing on the Handrail to slide it fully

onto the post. Next, pivot the lower end of the Handrail down and pull back on it (see arrow B) to align it with the hole in the left Upright.

Tighten two Handrail Screws (103) into the upper end of the Handrail (101) and the left Upright (70). Tighten a Handrail Bolt (95) with a Handrail Washer (102) into the left Upright and the lower end of the Handrail.

Attach the other Handrail (101) to the right Upright (70) as described above.

3.Remove the six Screws (43) from the underside of the

Console (78).

Locate the two tabs on the Reading Rack (12). Slide the tabs up into the two slots in the front of the Console (78). Attach the Reading Rack to the Console with the six

Screws (43).

1
					70
					30
2	Post
101
		103	70
		A		95	70
			102
	B	Hole	101	103	95
					102
3			12
					Tabs
		78
				43
					43

6