Stamina Products 50-0220 owner manual Eyelet End

Page 10

ASSEMBLY INSTRUCTIONS

STEP 10

Attach the HANDRAIL(20) to the FRONT SUPPORT(6) with BUTTON HEAD BOLTS(M8x1.25x15mm) (55) and WASHERS(M8)(69).

STEP 11

NOTE: Do not over tighten BOLTS(56, 59) as PULLEYS(23) must rotate freely after BOLTS(56, 59) are tightened.

Run the Eyelet End of the LAT BAR CABLE(25), 2050mm (80.7”) long, through the slot at the top end of the TOP BEAM(5). Attach the BALL END of the LAT BAR CABLE(25) to the TOP BEAM(5)with a PULLEY(23), a BUTTON HEAD BOLT(M8x1.25x115mm)(59), a NYLOCK NUT(M8x1.25)(67), two WASHERS(M8)(69), and two PULLEY SPACERS(24). Attach the LAT BAR CABLE(25) to the bracket on the TOP BEAM(5) with a PULLEY(23), a BUTTON HEAD BOLT BOLT(M8x1.25x45mm)(56), a NYLOCK NUT(M8x1.25)(67), two WASHERS(M8)(69), and the WIDE CABLE GUIDE(26).

Eyelet End

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model# Table of Contents Safety InstructionsCall Us First Before YOU Begin BioFLEXEquipment Warning & Notice Labels Label is larger than actual sizeHardware Identification Chart Assembly Instructions WASHERSM1070. Securely tighten all of the bolts from Step Assembly Instructions Eyelet End Assembly Instructions Lug Assembly Instructions Setting UP the Accessories LAT BAR36Conditioning Guidelines WARM-UP and COOL-DOWN BioFLEX 2200 Resistance Chart Operational InstructionsTraining Tips Workout InstructionsWorkout Instructions Upright Row Standing Triceps Pushdown Side Bend Maintenance StorageProduct Parts Drawing Parts List PART# Part Name QTYPart Name QTY Limited Warranty WarrantyPage Page FAX/MAIL Ordering Form Stamina Products, Inc Box Springfield, MO
Top Page Image Contents