Stamina Products 50-0220 owner manual Assembly Instructions

Page 11

ASSEMBLY INSTRUCTIONS

STEP 12

Hook a PULLEY SET(29) to one of the hooks on the end of the CROSSING BAR(7). Run the Eyelet End of the CABLE(28), 3980mm (156.7”) long, through the PULLEY SET(29).

Run the Eyelet End of the CABLE(28) through another PULLEY SET(29). Hook the PULLEY SET(29) to the hook on the BASE FRAME(1).

Attach the CABLE(28) to the Bracket on the LEFT FORCE ARM(9) with a PULLEY(23), a PULLEY COVER(74), a BUTTON HEAD BOLT(M8x1.25x80mm)(57), a WASHER(M8)(69), and a NYLOCK NUT (M8x1.25)(67).

Attach the CABLE(28) to the LOWER UPRIGHT(3) with a PULLEY(23), a CABLE GUIDE(27), a BUTTON HEAD BOLT(M8x1.25x90mm)(58), two WASHERS(M8)(69), and a NYLOCK NUT(M8x1.25) (67).

Connect the CABLE(28) to the LAT BAR CABLE(25) with the SMALL QUICK LINK(40). Repeat all the above assembly for the other side. Both the CABLES(28) are connected to the LAT BAR CABLE(25) with the SMALL QUICK LINK(40). The inset drawing shown the cables after assembly at the back.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Model# Safety Instructions Table of ContentsCall Us First BioFLEX Before YOU BeginLabel is larger than actual size Equipment Warning & Notice LabelsHardware Identification Chart Assembly Instructions WASHERSM1070. Securely tighten all of the bolts from Step Assembly Instructions Eyelet End Assembly Instructions Lug Assembly Instructions LAT BAR36 Setting UP the AccessoriesConditioning Guidelines WARM-UP and COOL-DOWN Operational Instructions BioFLEX 2200 Resistance ChartWorkout Instructions Training TipsWorkout Instructions Upright Row Standing Triceps Pushdown Side Bend Storage MaintenanceProduct Parts Drawing PART# Part Name QTY Parts ListPart Name QTY Warranty Limited WarrantyPage Page Stamina Products, Inc Box Springfield, MO FAX/MAIL Ordering Form
Top Page Image Contents