OPERATIONAL INSTRUCTIONS
INVERSION ANGLE ADJUSTMENT
There are 11 adjustment holes in the ANGLE ADJUSTMENT BARS(85) allowing you restrict the movement of the NYLON BED(37) to different angles by inserting the PULL PINS(86) into different adjustment holes.
The top holes will allow the least amount of inversion angle. The lowest hole will allow the greatest amount of inversion angle and the Elite Inversion System will go into the full inversion position.
CAUTION:
1.Use the holes near the top in the ANGLE ADJUSTMENT BARS(85) until you become familiar with the Elite Inversion System.
2.Both PULL PINS(86) must be inserted into the same hole in the ANGLE ADJUSTMENT BARS(85).
Trying to insert the PULL PINS(86) into different positions could cause damage to the machine, and injury to the user.
HEEL HOLDER USE AND ADJUSTMENT
1.Place your feet on the FOOTREST(11) with your ankles between the
HEEL HOLDERS(15) and FOAM PADS(18).
2.The HEIGHT ADJUSTMENT BEAM(10) includes a LEVER(23) to grip and release your feet. Pull the LEVER(23) toward you until your ankles are securely held between the HEEL HOLDERS(15) and
FOAM PADS(18).
3.To release your feet or relax the grip, pull the LEVER(23) toward you slightly and press the button on the end of the lever.
Button |
THE HANDRAILS
For added convenience, and safety, a set of HANDRAILS has been added to the Elite Inversion System. These HANDRAILS are located at both sides of the frame. The HANDRAILS are to help you return to the upright position from any degree of inversion. If you wish to return to the upright position, and the bed is moving too slowly, or not moving at all, simply grab the HANDRAILS and pull on them until you return to the upright position.
12