Invacare MA60, MA65 manual Connecting the Hose

SECTION 2—OPERATION

Connecting the Hose

CAUTION

Ensure that the hose connecting the control unit to the mattress is routed such that it cannot be stepped on, kinked, squeezed or otherwise damaged.

NOTE: For this procedure, refer to FIGURE 2.2.

1.Locate the hose at the foot end of the mattress.

2.Locate the control unit connectors on the right side of the control unit.

3.Squeeze and hold the tabs on the hose connectors.

4.Insert the hose connectors into the control unit connectors.

5.Push the hose connectors into the control connectors until an audible click is heard.

NOTE: The audible click indicates that the hose connectors are properly engaged with the control connectors.

Control Unit

Connectors

Tab

Hose

Connector

Hose

FIGURE 2.2 Connecting the Hose

MA60 Series 12 Part No 1148137