SECTION
Using the Front Panel
NOTE: For this procedure, refer to FIGURE 2.3.
| DETAIL “A” - MA60 FRONT PANEL |
| ||
|
| Fowler |
| Low Pressure |
Power | Alternating | Power |
| |
Button | LED | |||
Button | Pressure Button | Fail LED |
| |
|
| |||
Static Button |
|
|
|
| Lock/Alarm |
|
|
| Max Inflate | Button | |
Soft Button | LCD Display |
|
| ||
Firm Button |
| Button |
| ||
|
|
|
| ||
|
|
| |||
| DETAIL “B” - MA65 FRONT PANEL |
| |||
|
|
| Fowler | Power | Low Pressure |
Power |
| Alternating |
| ||
| Button | LED | |||
Button | Pressure Button | Fail LED |
| ||
|
| ||||
Static Button |
| Lock/Alarm | |
Mode Button | Button | ||
Soft Button LCD Display | |||
(Max Inflate/ |
| ||
Firm Button |
| ||
| Low Air Loss) |
|
FIGURE 2.3 Using the Front Panel
Power Button
1. To turn the control unit on or off, press and release the Power button (
).
NOTE: Once the unit is plugged in, an AMBER LED on the control unit is lit indicating that the system is in STAND BY mode. Once the Power button is pressed and released, a GREEN LED illuminates indicating that the control unit is on.
NOTE: If the power comes on after a power outage, the control unit will go through its system initialization routine for a few seconds and then resume the desired function.
MA60 Series | 14 | Part No 1148137 |