Contact
Heart Rate
(CHR)
Contact Heart Rate
CHAPTER ONE: BASIC OPERATIONS
The contact heart rate (CHR) system lets you monitor your heart rate without wearing a strap.
Gently grasp the contact heart rate pads as shown.
When the system detects your hands, the Heart Rate label will start flashing in time with your heart beat. During this time, the system is analyzing and locking in your heart rate. Within about 15 seconds, your digital heart rate in beats per minute (bpm) should be displayed.
Important: The CHR System should only be used at speeds of 4 mph or lower. Above this speed the CHR accuracy is unavoidably unreliable due to large muscle movements.
For Best
CHR
Results
1.Exercise with smooth body motions.
2.Breathe smoothly and regularly, and avoid talking. (Talking will cause unrepresentative heart rate spikes of 5 to 10 bpm.)
3.Grip the pads lightly, not tightly.
4.Make sure your hands are clean, free of both dirt and hand lotions.
5.See Appendix A for more details on Contact Heart Rate monitoring.
A Note on CHR Accuracy
CHR monitoring may be a bit less accurate than a chest strap, since the heart rate signals are much stronger at the chest.
About 5% of the population cannot be picked up by any CHR system. This is because their heart is positioned in a more
leaning over to one side.
When using a Heart Rate Control workout, it is best to use chest strap monitoring. These workouts work best with the extra accuracy gained from a
PS 75 Treadmill Owner’s Guide | 13 |