Aiwa NSX-A303 Inserting batteries, When to replace the batteries, To turn the unit on, Demo game

Inserting batteries

Detach the battery cover on the rear of the remote control and insert two R6 (size AA) batteries.

@~e

R6(AA)

,— ~“- —.

■CD

POWER

In. .

h~ -—-/CLOCIU

When to replace the batteries

The maximum operational distance between the remote control and the sensor on the main unit should be approximately 5 meters (16 feet). When this distance decreases, replace the batteries with new ones.

!:–— ---

To turn the unit on

DIMMER

To use SHIFT on the remote control

Buttons @ have two different functions. One of these functions is indicated on the button, and the other on the plate above the button.

To use the function on the button, simply press the button.

To use the function on the plate above the button, press the button while pressing SHIFT.

To use FUNCTION on the remote control

The FUNCTION substitutes for the function buttons (TAPIYDECK 1/2, TUNER, VIDEO/AUX, CD) on the main unit.

Each time FUNCTION is pressed, the next function is selected cyclically. When tapes are inserted in both decks, each deck is selected with FUNCTION.

●If the remote control is not going to be used for an extended period of time, remove the batteries to prevent possible electrolyte leakage.

●The remote control may not operate correctly when:

-The line of sight between the remote control and the remote sensor inside the display window is exposed to intense light, such as direct sunlight

-Other remote controls are used nearby (those of a television, etc.)

Press one of the function buttons (TAPE, TUNER, VIDEO/AUX, CD). Playback of the inserted disc or tape begins, or the previously tuned station is received (Direct Play Function).

pOWER is also available.

When the unit is turned on, the disc compartment may open and close to reset the unit.

To turn the power off

Press POWER.

Flash window

The window on the top of the unit lights up or flashes while the unit is being powered on.

To turn off the light of the top window, press W while pressing CD. To turn back on, repeat the above.

DEMO (Demonstration) mode

When the AC cord is connected, the display window demonstrates the functions of the unit. When the power is turned on, the DEMO display is overridden by the operation display. When the power is turned off, the DEMO mode is restored;

To cancel DEMO mode

Press II SET while the power is off. The clock flashes on the display. (To set the current time, see “SETTING THE CLOCK on page 15.) To re-activate DEMO mode, press ~ while the power is off.

Demo game

You can enjoy playing Demo game with your system. 1 Press >.

Three numbers on the display start to run.

2Press ■ once.

The number on the left side stops.

3Press ■ twice to stop the remaining two numbers. Scoring:

20points are given to start the game.

If all the numbers are equal, 50 points are added to the score. If not eaual, one point is subtracted.

If the gained points reach 9999, you win. If the gained points fall to O, you lose.

To reset the game

Press CLOCW-DIMMER,then press >. The game starts again.

5 ENGLISH