Mounting Batteries

ENG

Open the battery cover, and mount four LR-20 (D) batteries. Watch the orienta- tion of the plus and minus poles.

When they are mounted, the buzzer sounds, and all data is cleared automatically.

Caution If the buzzer does not sound, the orientation of the batteries may not be correct. Check the orientation, and mount the batteries again.

Changing batteries

When the batteries are low, the mark lights up. When the mark lights up, change the batteries before they become exhausted.

Caution Do not mix old and new batteries, or different types of batteries.

Battery cover

Trying out the GBF PRO RECUMBENT BIKE for the first time

First, ride the GBF PRO RECUMBENT BIKE to familiarize yourself with the machine.

The bike can be used as fitness equipment without connecting it to Playstation 2.

Initial screen

When the batteries are mounted, the initial screen as shown in the figure appears.

Start pedaling slowly.

Training screen 1

1 2

This screen displays your condition that keeps changing during training.

1Indicates the speed during training.

Reference: The SPEED indication can be switched between the pedaling speed (RPM) and riding speed (KM/H or MPH). (refer to “Entering target distance”, page 9.)

2Indicates the current calorie consumption.

When the button is pressed, switches the indication to watts.

3Indicates the elapsed time since the start of training.

4 Indicates the riding distance since the start of training.

Training screen 2

Power saving screen

Changing the program

You can change the program by pressing the button.

You can choose from the manual mode (P-1), five program modes (P-2 to P-6) with different load patterns, and five HR control modes (P-7 to P-11).

For details of each program, refer to “How to Select a Program” on page 10.

Changing the load level


You can change the load level by pressing the		and	buttons during training.
You can change the load level by pressing the		and	buttons during training.
For example, press the	button. You can see that the profile graph goes up higher, and
For example, press the
feel that the pedaling becomes heavier.

Reference: In the HR control modes, the load level does not change even when the

and buttons are pressed.

When no signals are input for approximately three minutes in any of the screens, the blank power saving screen appears as shown in the figure. The screen previous to the power saving screen appears when you start pedaling again, or press any of the buttons.