4. Set the Right Upright Spacer (79) on the Base | 4 |
|
|
|
(83). Be careful not to pinch the Upright Wire |
|
|
| |
|
| 6 |
| |
(38). With the help of a second person, hold a |
|
|
| |
|
|
|
| |
Bolt Spacer (80) inside the lower end of the | 78 |
|
|
|
Right Upright (78). Insert a 3/8" x 4" Bolt (6) with |
|
|
| |
a 3/8" Star Washer (9) into the Right Upright |
| 79 | 9 |
|
and the Bolt Spacer. Repeat this step with a |
|
|
| |
|
| 38 |
| |
second Bolt Spacer (80), 3/8" x 4" Bolt (6), |
|
|
| |
|
|
|
| |
and 3/8" Star Washer (9). Then, set the Right |
|
|
| 77 |
Upright in the Right Upright Spacer. |
|
|
| |
|
|
|
| |
Finger tighten the 3/8" x 4" Bolts (6); do not |
|
|
| 80 |
fully tighten the Bolts yet. |
|
| 83 |
|
Press a Base Endcap (77) into the Base (83). |
|
|
|
|
5. With the help of a second person, carefully tip | 5 |
|
|
|
the treadmill onto its right side. Partially fold the | B |
|
| |
|
|
| ||
Frame (56) so that the treadmill is more stable; | A |
|
| |
|
|
| ||
do not fully fold the Frame yet. |
|
|
|
|
Remove and discard the two indicated bolts (A) |
|
|
|
|
and the shipping bracket (B). |
|
|
|
|
Attach a Base Pad (81) to the Base (83) in the | 81 |
| 56 |
|
2 |
|
| ||
location shown with a #8 x 1" Tek Screw (2) and |
|
| ||
|
|
| ||
a Base Pad Spacer (13). Then, attach another |
|
|
| 4 |
Base Pad (81) with only a #8 x 1" Tek Screw (2). |
|
|
| |
Remove the 3/8" Nut (8), the 3/8" x 2" Bolt (4), | 83 |
| 13 |
|
and the shipping bracket (C) from the Base (83). |
|
| ||
|
| 81 |
| |
Attach a Wheel (84) with the Bolt and the Nut |
|
|
| |
|
| 84 |
| |
that you just removed. Do not overtighten the |
|
|
| |
Nut; the Wheel must turn freely. Discard the |
|
| 2 | C |
|
| 8 | ||
shipping bracket. |
|
| ||
|
|
|
| |
6. Set the Left Upright Spacer (76) on the Base | 6 | 6 |
|
|
(83). With the help of a second person, hold a |
|
| ||
|
|
| ||
|
|
|
| |
Bolt Spacer (80) inside the lower end of the Left |
|
|
|
|
Upright (74). Insert a 3/8" x 4" Bolt (6) with a |
|
| 74 |
|
3/8" Star Washer (9) into the Left Upright and |
|
|
| |
|
|
|
| |
the Bolt Spacer. Repeat this step with a sec- |
|
|
|
|
ond Bolt Spacer (80), 3/8" x 4" Bolt (6), and |
| 9 |
|
|
3/8" Star Washer (9). Then, set the Left Upright | 77 |
| 76 |
|
in the Left Upright Spacer. |
|
|
| |
|
|
|
| |
Finger tighten the 3/8" x 4" Bolts (6); do not |
|
|
|
|
fully tighten the Bolts yet. | 80 |
|
|
|
|
|
|
| |
Press a Base Endcap (77) into the Base (83). |
| 83 |
|
|
With the help of a second person, tip the tread- |
|
|
|
|
mill so that the Base (83) is flat on the floor. |
|
|
|
|
| 8 |
|
|
|