NordicTrack NTL19007.0 user manual Troubleshooting, Problem The power turns off during use

Page 26

TROUBLESHOOTING

Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual.

PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 12). Use only a single-outlet surge suppres- sor that meets all of the specifications described on page 12. IMPORTANT: The treadmill is not compatible with GFCI-equipped outlets.

b. After the power cord has been plugged in, make sure that the key is inserted into the console.

c. Check the reset/off circuit breaker located on the treadmill frame near the power cord. If the switch pro- trudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch to the reset position.

PROBLEM: The power turns off during use

c

Tripped

Reset

SOLUTION: a. Check the reset/off circuit breaker (see the drawing above). If the circuit breaker has tripped, wait for five minutes and then press the switch to the reset position.

b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for five minutes, and then plug it back in.

c. Remove the key from the console. Reinsert the key into the console.

d. If the treadmill still will not run, please see the front cover of this manual.

PROBLEM: The displays of the console do not function properly

SOLUTION: a. Remove the key from the console and UNPLUG THE POWER CORD. Place the treadmill in the storage po- sition (see HOW TO FOLD AND MOVE THE TREAD- MILL on page 25).

Next, remove the two indicated 3/4" Screws (4).

Lower the treadmill (see HOW TO LOWER THE TREADMILL FOR USE on page 25). Remove the four indicated 3/4" Screws (4), and remove the Hood (44).

a

4

 

4

4

4

 

44

 

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents
Call TOLL-FREE QUESTIONS?Model No. NTL19007.0 Serial No Table of Contents Important Precautions Power Lines Service Before YOU Begin Assembly Make sure that the power cord is unpluggedTighten the Upright Bolts yet Ful not to pinch the Upright Wire HarnessNot tighten the Upright Bolts yet Wires are pinched Page HOW to Connect AN External Source Using a Catv Cable Chest Pulse Sensor Care and Maintenance HOW to USE the Chest Pulse SensorHOW to PUT on the Chest Pulse Sensor Chest Pulse Sensor TroubleshootingPRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeMeasure your heart rate if desired Select a display mode and follow your progressWith the exercise information on the screen Turn on the fan if desiredPress the Start button to start the workout HOW to USE AN Event Training WorkoutSelect an event training workout Enter your weight HOW to USE a Preset WorkoutSelect a preset workout HOW to Create a Custom Workout Select one of the four custom workoutsHOW to USE a Custom Workout HOW to USE AN Ifit Card Insert an iFIT card and select a workoutHOW to USE a Heart Rate Workout Select one of the four heart rate workoutsHOW to Operate the Personal Television Press the Volume buttons to adjust the volumeInformation Mode Press the TV button again and add or delete channelsHOW to USE the Stereo Sound System HOW to Adjust the Cushioning SystemHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Problem Television reception is poor Problem The chest pulse sensor does not function properlyWorkout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyR1207A Qty DescriptionQty Description Exploded DrawingModel No. NTL19007.0 Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty