NordicTrack NTL15809.1 user manual Top, Problem The iFit Live mode does not function correctly

Page 26

Lower the treadmill (see HOW TO LOWER THE

 

 

1

1

TREADMILL FOR USE on page 24). Remove the four

 

75

indicated #8 x 3/4" Screws (1), and remove the Motor

 

 

 

Hood (75).

 

 

 

 

Next, locate the Reed Switch (53) and the Magnet

 

Top

 

 

(58) on the left side of the Pulley (59). Turn the Pulley

 

 

 

until the Magnet is aligned with the Reed Switch.

 

View

 

 

Make sure that the gap between the Magnet and

 

24

 

1/8 in.

the Reed Switch is about 1/8 in. (3 mm). If neces-

 

 

sary, loosen the indicated #8 x 3/4" Tek Screw (24),

 

 

 

59

move the Reed Switch slightly, and then retighten the

 

53

 

Screw. Then, reattach the Motor Hood (not shown)

 

 

58

with the six #8 x 3/4" Screws (not shown), and run the

 

 

 

 

treadmill for a few minutes to check for a correct

 

 

 

 

speed reading.

 

 

 

 

PROBLEM: The incline of the treadmill does not change correctly

 

 

 

 

SOLUTION: a. Recalibrate the incline system (see step 3 on page 22).

 

 

 

 

PROBLEM: The iFit Live mode does not function correctly

 

 

 

 

SOLUTION: a. If the iFit Live mode is not functioning correctly, make sure that the treadmill has the most current

firmware available (see step 7 on page 23).

 

 

 

 

PROBLEM: The walking belt slows when walked on

 

 

 

 

SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 11.

b. If the walking belt is overtightened, treadmill perfor-

b

 

 

 

mance may decrease and the walking belt may be-

3–4 in.

 

 

come damaged. Remove the key and UNPLUG THE

 

 

 

POWER CORD. Using the hex key, turn both idler

 

 

 

 

roller bolts counterclockwise, 1/4 of a turn. When the

 

 

 

 

walking belt is properly tightened, you should be able

 

 

 

 

to lift each edge of the walking belt 3 to 4 in. (8 to 10

 

 

 

 

cm) off the walking platform. Be careful to keep the

 

 

 

 

walking belt centered. Then, plug in the power cord,

 

 

 

 

insert the key, and run the treadmill for a few min-

Idler Roller Bolts

 

 

utes. Repeat until the walking belt is properly tight-

 

 

ened.

 

 

 

 

c. If the walking belt still slows when walked on, please see the front cover of this manual.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents QUESTIONS? Model No. NTL15809.1 Serial NoTable of Contents Important Precautions Page Before YOU Begin Assembly WrenchTo pinch the Upright Wire Page Assembly Make sure to keep the latch cap inside PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModePage Measure your heart rate if desired HOW to USE a SET-A-GOAL Workout Start the workoutStart the workout See on Select the iFit Live mode HOW to USE the Ifit Live ModeConnect your treadmill to your own wireless network Select the settings mode HOW to USE the Stereo Sound SystemHOW to USE the Settings Mode Select the wireless network modeView the unit of measurement Exit the settings modeLog in to your iFit Live account HOW to USE the Maintenance Mode View technical information Exit the mainenance modeCalibrate the screen HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Lower the Treadmill for USECompatible with GFCI-equipped outlets TroubleshootingProblem The power turns off during use Top Problem The iFit Live mode does not function correctlyProblem The walking belt slows when walked on Problem Solution Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart LIST-Model No. NTL15809.1 Qty DescriptionDescription Key No. Qty R0610A Exploded Drawing B-Model No. NTL15809.1 Exploded Drawing C-Model No. NTL15809.1 Exploded Drawing D-Model No. NTL15809.1 Exploded Drawing E-Model No. NTL15809.1 Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty

NTL15809.1 specifications

The NordicTrack NTL15809.1 is a state-of-the-art treadmill designed for home fitness enthusiasts who demand performance, durability, and advanced technology. This model stands out in the crowded field of fitness equipment, offering a robust set of features tailored to enhance the workout experience.

One of the primary highlights of the NTL15809.1 is its powerful motor. Equipped with a commercial-grade motor, it ensures smooth and consistent performance, accommodating everything from brisk walking to intense running sessions. The motor is designed to operate quietly, minimizing noise disruption during workouts, which is particularly beneficial for home environments.

The treadmill features an expansive running surface, providing ample room for natural movement. This spacious deck not only enhances comfort but also reduces the risk of injuries, allowing users to focus on their fitness goals. Additionally, the cushioned running surface helps to absorb impact, making it easier on the joints compared to running on harder surfaces.

An integral part of the NTL15809.1 is its advanced technology. The included iFit subscription offers users access to a vast library of workouts and interactive training sessions led by professional trainers. With the option to connect digitally, users can tailor their fitness journeys, follow global trails through virtual maps, and adapt their routines based on real-time feedback.

The treadmill's 10-inch interactive touchscreen provides an engaging platform for tracking performance metrics, watching workouts, and experiencing immersive training sessions. Users can monitor vital stats like speed, distance, and calories burned, allowing them to stay motivated and reach their fitness goals.

The NTL15809.1 also features adjustable incline settings, adding variety to workouts and simulating outdoor running conditions. The incline can be easily adjusted during sessions, helping users to target different muscle groups and enhance cardiovascular fitness.

For convenience, this treadmill is equipped with built-in Bluetooth speakers, allowing users to enjoy their favorite music or podcasts while exercising. Additionally, the space-saving design ensures it can be folded up when not in use, making it an ideal choice for those with limited workout space.

Overall, the NordicTrack NTL15809.1 combines advanced technology, a sturdy build, and user-centric design to create a comprehensive fitness solution for individuals seeking to enhance their health and well-being. Whether you're a beginner or a seasoned athlete, this treadmill caters to various fitness levels, making workouts efficient and enjoyable.
Top Page Image Contents