NordicTrack NTL15809.1 user manual Problem Solution

Page 27

PROBLEM:

SOLUTION:

The walking belt is off-center or slips when walked on a. If the walking belt is off-center, remove the key and

UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left idler roller bolt clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the left idler roller bolt counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is cen- tered.

b. If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller bolts clockwise, 1/4 of a turn. When the walking belt is correctly tight- ened, you should be able to lift each edge of the walking belt 3 to 4 in. (8 to 10 cm) off the walking platform. Be careful to keep the walking belt cen- tered. Then, plug in the power cord, insert the key, and carefully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

a

b

27

Image 27

Contents Model No. NTL15809.1 Serial No QUESTIONS?Table of Contents Important Precautions Page Before YOU Begin Wrench AssemblyTo pinch the Upright Wire Page Assembly Make sure to keep the latch cap inside Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Features of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the PowerPage Measure your heart rate if desired Start the workout HOW to USE a SET-A-GOAL WorkoutStart the workout See on HOW to USE the Ifit Live Mode Connect your treadmill to your own wireless networkSelect the iFit Live mode Select the wireless network mode HOW to USE the Stereo Sound SystemHOW to USE the Settings Mode Select the settings modeExit the settings mode Log in to your iFit Live accountView the unit of measurement HOW to USE the Maintenance Mode Exit the mainenance mode Calibrate the screenView technical information HOW to Lower the Treadmill for USE HOW to Fold and Move the Treadmill HOW to Fold the Treadmill HOW to Move the TreadmillTroubleshooting Problem The power turns off during useCompatible with GFCI-equipped outlets Problem The iFit Live mode does not function correctly Problem The walking belt slows when walked onTop Problem Solution Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesQty Description Part LIST-Model No. NTL15809.1Description Key No. Qty R0610A Exploded Drawing B-Model No. NTL15809.1 Exploded Drawing C-Model No. NTL15809.1 Exploded Drawing D-Model No. NTL15809.1 Exploded Drawing E-Model No. NTL15809.1 Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT