If the speed or incline setting for the current seg- ment is too high or too low, you can override the setting by pressing the Speed or Incline buttons; however, when the next segment begins, the treadmill will automatically adjust to the speed and incline settings for the next segment.
To stop the program at any time, press the Stop button. To restart the program, press the Start but- ton. The walking belt will begin to move at 1 mph. When the next segment of the program begins, the treadmill will automatically adjust to the speed and incline settings for the next segment.
6.Measure your heart rate if desired. See step 7 on page 15.
7.Turn on the fan if desired. See step 8 on page 15.
8.When you are finished exercising, remove the key from the console.
See step 9 on page 15.
17