HOW TO USE A PULSE PROGRAM
CAUTION: If you have heart prob- lems, or if you are over 60 years of age and have been inactive, do not use the Pulse pro- grams. If you are taking medication regularly, consult your physician to find whether the medication will affect your exercise heart rate.
target heart rate setting may be programmed for two or more consecutive segments.
5.Adjust the maximum target heart rate setting if desired.
To adjust the maximum target heart rate setting, press the increase and decrease buttons beside the User/Enter button (see EXERCISE INTENSITY on page 28). To adjust the target heart rate setting quickly, hold down one of the buttons.
Follow the steps below to use a Pulse program.
1.Put on the optional chest pulse sensor.
Note: You must wear the optional chest pulse sen- sor to use a Pulse program.
2.Insert the key into the console.
See HOW TO TURN ON THE POWER on page 12.
3.Personalize console settings if desired.
See HOW TO PERSONALIZE CONSOLE SET- TINGS on page 12.
4.Select a Pulse program.
To select a Pulse program, press the Programs button repeatedly until the words PULSE PRO- GRAM 1 or PULSE PROGRAM 2 appear in the display.
When a Pulse program is selected, the display will show the name of the program and the maximum target heart rate setting of the program. In addition, a profile of the target heart rate settings of the pro- gram will appear in the display.
Pulse program 1 is divided into
6.Press the Start button to start the program.
A moment after the button is pressed, the walking belt will begin to move. Hold the handrails and begin walking.
7.Select a display mode and monitor your progress with the display and the training zone bar.
When a Pulse program is selected, the console of- fers two display modes. Press the Display button to select the desired display mode.
Regardless of which display mode you select, a profile of the target heart rate settings of the program will appear in the display. A white line representing your heartbeat will also appear; each time a heart- beat is detected, an additional peak will appear in the line. A small arrow below the profile will indicate your progress.
During each
When each segment ends, a series of tones will sound.
18