NordicTrack CMX500 user manual Problem The walking belt slows when walked on, Power Cord

Page 21

PROBLEM: The walking belt slows when walked on

 

SOLUTION:

a. Use only a UL-listed surge protector, rated at 15 amps, with a 1 mm

2 (14-gauge) cord of five feet

 

or less in length.

 

b. If the walking belt is overtightened, treadmill perfor-

 

mance may decrease and the walking belt may be-

 

come damaged. Remove the key and

UNPLUG THE

POWER CORD

. Using the allen wrench, turn both

rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 5 to

7 cm (3 to 4 in.) off the walking platform. Be careful to keep the walking belt centered. Plug in the power

cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is properly tight- ened.

PROBLEM: The walking belt is off-center or slips when walked on

b

3”–4”

Rear Roller Adjustment Bolts

SOLUTION:

a.

If the walking belt has shifted to the left,

first remove

 

 

the key and

UNPLUG THE POWER CORD

. Using the

 

 

allen wrench, turn the left rear roller adjustment bolt

 

 

 

clockwise, and the right bolt counterclockwise, 1/4 of a

 

 

 

turn each. Be careful not to overtighten the walking belt.

 

 

 

Plug in the power cord, insert the key and run the tread-

 

 

 

mill for a few minutes. Repeat until the walking belt is

 

 

 

centered.

 

 

 

b.

If the walking belt has shifted to the right,

first re-

 

 

move the key and

UNPLUG THE POWER CORD

.

 

 

Using the allen wrench, turn the left rear roller adjust-

 

 

 

ment bolt counterclockwise, and the right bolt clockwise,

 

 

 

1/4 of a turn each. Be careful not to overtighten the

 

 

 

walking belt. Plug in the power cord, insert the key and

 

 

 

run the treadmill for a few minutes. Repeat until the

 

 

 

walking belt is centered.

 

 

a. If the walking belt slips when walked on, first remove

 

 

 

the key and

UNPLUG THE POWER CORD

. Using the

 

 

allen wrench, turn both rear roller adjustment bolts

 

clockwise, 1/4 of a turn. When the walking belt is cor- rectly tightened, you should be able to lift each side of

the walking belt 5 to 7 cm (3 to 4 in.) off the walking platform. Be careful to keep the walking belt centered.

Plug in the power cord, insert the key and carefully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

a

b

c

PROBLEM: The incline of the treadmill does not change correctly or does not change when iFIT.com

 

CD’s and videos are played

 

 

SOLUTION:

a. With the key inserted into the console, press one of the INCLINE buttons.

While the incline is

 

changing, remove the key.

After a few seconds, re-insert the key. The treadmill will automati-

cally rise to the maximum incline level and then return to the minimum level. This will recalibrate the incline.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Model No. NMTL06902 Serial No QUESTIONS?Serial Number Decal Patent PendingTable of Contents Never move the walking belt while the power Important PrecautionsUse the treadmill only as described in this manual M 5 ft. or less in length. Do not use an extension cordNever insert or drop any object into any opening Using the treadmill Before YOU BeginLeft Side Assembly requires two people AssemblyExtension Leg and thread the Handrail Bolt Four turnsMake sure that the Extension HOW to Plug in the Power Cord Operation and AdjustmentFeatures of the Console Console DiagramTo reduce the possibility of electric shock See VideoHOW to USE the Manual Mode HOW to Turn on the PowerCALS./FAT Cals Next speed and incline settings for the program HOW to USE Personal Trainer ProgramsInsert the key into the console To start the programHOW to Connect Your Portable CD Player HOW to Connect Your Portable StereoVideocassettes HOW to Connect Your Computer HOW to Connect Your Home StereoPlug the adapter into the Line OUT jack on your stereo Audio 5mm Cable AdapterPrograms HOW to Connect Your VCRStart button or the Speed To the next settings of the CD or video programConsole Follow your progress with the LED track Four displaysHOW to USE Programs Directly from OUR Internet Site Should be blank If a d ap Information MODE/DEMO ModeHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USESolution TROUBLE-SHOOTINGPower Cord Problem The walking belt slows when walked onUnplug the Power Cord If the walking belt has shifted to the leftExercise Intensity Conditioning GuidelinesWorkout Guidelines Exercise FrequencyKey Description QtyKey No. Qty. Description Ordering Replacement Parts Exploded NMTL06902
Top Page Image Contents