Reebok 5 manual Frame until this step is completed

Page 14

15.Hold the Right Upright Cover (86) against the console assembly. Align the holes in the Right Upright Cover with the holes in the Right Upright (85). Attach the Right Upright Cover with two #8 x 3/4" Screws (1).

Attach the Left Upright Cover (80) to the Left Upright (84) in the same way.

See steps 4 and 6. Tighten the four 3/8" x 4" Bolts (7) and the two 3/8" x 1 1/2" Bolts (14).

16.Raise the Crosswalk Arms (121) (only one is shown). Raise the Frame (55) to the position shown. Have a second person hold the

Frame until this step is completed.

Orient the Storage Latch (51) so that the large barrel and the latch knob are oriented as shown. Attach the upper end of the Storage Latch (51) to the bracket on the Frame (55) with a 3/8" x 2" Bolt (8) and a 3/8" Nut (10).

Attach the lower end of the Storage Latch (51) to the Base (95) with a 3/8" x 1 3/4" Bolt (6). Note: It may be necessary to move the Frame (55) back and forth to align the Storage Latch with the Base.

Lower the Frame (55) (see HOW TO LOWER THE TREADMILL FOR USE on page 25).

15
86		80
1	Console	1
1	Assembly	1
85		84
16	55
10	8
	8

51
Latch	121
Knob	121
Large
Barrel95
	6

17.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 27 and 28).

14

Image 14

Contents Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT QUESTIONS?Model No. RBTL61010.0 Serial No On the WEBTable of Contents Important Precautions Save These InstructionsBefore YOU Begin Assembly Tighten the Nut the Wheel must turn freely Make sure that the power cord is unpluggedDo not fully fold the Frame yet Page Page Right Upright 85 as described above Not fully tighten the Resistance KnobAttach the other resistance mechanism to Attach the other Crosswalk Arm 121 as de Scribed aboveTighten the four 1/4 x 1 Bolts Screws, and then tighten each of them Frame until this step is completed PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Console Diagram Features of the Console Select the manual mode HOW to Turn on the PowerHOW to USE the Manual Mode Insert the key into the consolePage Avoid moving your hands. When your pulse is Measure your heart rate if desiredStart the workout HOW to USE AN Onboard WorkoutSelect an onboard workout Select an iFit Live workout HOW to USE AN Ifit Live WorkoutSelect a user Follow your progress with the displays. See on HOW to USE the Stereo Sound SystemMake sure that the audio wire is fully inserted Information Mode HOW to USE the Crosswalk Arms HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Lower the Treadmill for USECompatible with GFCI-equipped outlets TroubleshootingProblem The power turns off during use Problem The walking belt slows when walked on TopProblem The console display has lines running through it Problem The crosswalk arms squeak during useWorkout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart LIST-Model No. RBTL61010.0 Key No. Qty DescriptionQty Exploded Drawing A-Model No. RBTL61010.0 R1110A Exploded Drawing B-Model No. RBTL61010.0 R1110A Exploded Drawing C-Model No. RBTL61010.0 103 102 105 2952 Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty