Reebok 5 manual Make sure that the power cord is unplugged, Do not fully fold the Frame yet

1.	Make sure that the power cord is unplugged.	1			Hole
	With the help of a second person, carefully tip					90
	the treadmill onto its left side. Partially fold the						5
	Frame (55) so that the treadmill is more stable;
	do not fully fold the Frame yet.
	Cut the shipping tie securing the Upright Wire					95
	(87) to the Base (95). Locate a plastic tie in the
	indicated hole in the Base, and use the tie to pull
	the Upright Wire out of the hole.	55	9490		5
	Attach two Base Feet (90) to the Base (95) in the
	locations shown with two #8 x 1" Tek Screws (5)
	and two Base Foot Spacers (94).					90 5
	Then, attach the other two Base Feet (90) with
	two #8 x 1" Tek Screws (5).
			94		90
2. Attach a Wheel (96) to the Base (95) with a 3/8"		2				89
	x 2" Bolt (8) and a 3/8" Nut (10). Do not over-		Plastic Tie
	tighten the Nut; the Wheel must turn freely.
	Press a Base Cap (89) into the Base (95).				87
	See the inset drawing. Cut the plastic tie near	8
	the Upright Wire (87).
			10	96	95

87Cut

7