Epic Fitness TL 2710 manual Raise the Frame 67 to the position shown

Page 11

8.Raise the Frame (67) to the position shown.

Have a second person hold the Frame until this step is completed.

Orient the Storage Latch (87) so that the large barrel and the latch knob are in the positions shown.

Attach the Storage Latch (87) to the bracket on the Base (103) with a 3/8” x 2” Bolt (4) and a 3/8” Jam Nut (7).

Attach the upper end of the Storage Latch (87) to the bracket on the Frame (67) with a 3/8" x 1 3/4" Bolt (3) and a 3/8" Jam Nut (7).

Lower the Frame (67) (see HOW TO LOWER THE TREADMILL FOR USE on page 25).

9.With the help of a second person, raise the front of the treadmill and insert the crossbar on the Base (103) into the cutout in the cardboard stand as shown. Have the second person hold the treadmill to prevent it from moving for- ward or backward.

Firmly tighten the four 3/8" x 3 3/4" Screws (5).

With the help of the second person, lower the treadmill off the cardboard stand.

8
	67
	7	3
		3
Latch		87
Latch		Large
Knob		Large
Knob		Barrel
		Barrel
	103	7
		7	4
		Latch	4
		Cap
9
			5
	103
5			Cardboard
			Stand

10.Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 27 and 28). To protect the floor or carpet from damage, place a mat under the treadmill. Extra hardware may be included.

11

Image 11

Contents Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT QUESTIONS?Model No. EPTL14211.0 Serial No Call TOLL-FREETable of Contents Important Precautions Page Before YOU Begin Part Identification Chart To prevent the treadmill from moving, tipping, or falling AssemblyMake sure that the power cord is unplugged Page Page Attach the Left Upright Sleeve not shown to Console assembly in the same wayRaise the Frame 67 to the position shown HOW to Plug in the Power Cord Operation AND ADJUSTMENTConsole DiagramFeatures of the Console Sole. Note It may take HOW to Turn on the PowerHOW to USE the Touch Screen Calibrate the incline system HOW to SET UP the CONSOLE Connect to your wireless network Register your product Check for firmware updatesHOW to USE the Manual Mode Power cord. Important If you do not do When you are finished exercising, removeAdjust the incline of the treadmill to zero per May damage the treadmill when you fold it toStart the workout HOW to USE AN Onboard WorkoutSelect an onboard workout Select the main menu. See on Select a set-a-goal workout HOW to USE a SET-A-GOAL WorkoutStart the workout. See on HOW to USE AN Ifit Live WorkoutHOW to USE the Equipment Settings Mode HOW to USE the Maintenance Mode Exit the wireless network mode HOW to USE the Wireless Network ModeEnable Wi-Fi Set up and manage a wireless network connectionHOW to Adjust the Cushioning System HOW to USE the Stereo Sound SystemHOW to USE the Internet Browser HOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Move the TreadmillSymptom The power turns off during use TroubleshootingSymptom The power does not turn on Symptom The walking belt slows when walked on Symptom The buttons on the screen do not work correctly Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Description Part ListQty Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty