Epic Fitness TL 2710 manual HOW to USE the Maintenance Mode

Page 22

HOW TO USE THE MAINTENANCE MODE

The console features a maintenance mode that allows you to update the console firmware, calibrate the in- cline of the treadmill, calibrate the screen, view techni- cal information, and view a button’s keycode.

1.Select the settings main menu. See step 1 on page 21.

2.Select the maintenance mode.

In the settings main menu, touch the Maintenance button to enter the mainte- nance mode.

The maintenance mode main screen will show information about the model and version of the treadmill.

3.Update the console firmware.

For the best results, regularly check for firm- ware updates.

Touch the Firmware Update button to check for firmware updates using your wireless network. The update will begin automatically.

To avoid damaging the treadmill, do not turn off the power or remove the key while the firm- ware is being updated.

Note: If you cannot update the console firmware over your wireless network, you can update the firmware using a USB drive. Go to www.iFit.com and download the latest firmware update onto your USB drive. Safely remove the USB drive from your computer and plug it into the USB port on the top of the console. The update should begin automatically.

The screen will show the progress of the update. When the update is complete, the treadmill will turn off and then turn back on. If it does not, press the

power switch into the off position. Wait for several seconds, and then press the power switch into the reset position. Note: It may take a few minutes for the console to be ready for use.

4.Calibrate the incline system of the treadmill.

Touch the Calibrate Incline button. Then, touch the Begin button to calibrate the incline system. The treadmill will automatically rise to the maximum incline level, lower to the minimum incline level, and then return to the starting position. This will calibrate the incline system. Press the Cancel but- ton to return to the maintenance mode. When the incline system is calibrated, touch the Finish button.

IMPORTANT: Keep pets, feet, and other objects away from the treadmill while the incline system is calibrating. In an emergency, pull the key from the console to stop the incline calibration.

5.Calibrate the screen.

If the screen is not properly calibrated, it will be dif- ficult to touch the correct buttons on the screen.

To calibrate the screen, touch the Calibrate Screen button. A small target will appear on the screen. Touch the center of the target. Then, touch the rest of the targets. After several seconds, the console will exit the calibration mode.

6.View machine information.

Touch the Machine Info button to view information about your treadmill. After you view the informa- tion, touch the back button on the screen.

7.Find Keycodes.

This option is intended to be used by service tech- nicians to identify whether a certain button is work- ing correctly.

8.Exit the maintenance mode.

To exit the maintenance mode, press the back but- ton on the console.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Call TOLL-FREE QUESTIONS?Model No. EPTL14211.0 Serial No Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Important Precautions Page Before YOU Begin Part Identification Chart Make sure that the power cord is unplugged AssemblyTo prevent the treadmill from moving, tipping, or falling Page Page Console assembly in the same way Attach the Left Upright Sleeve not shown toRaise the Frame 67 to the position shown Operation AND ADJUSTMENT HOW to Plug in the Power CordFeatures of the Console DiagramConsole HOW to USE the Touch Screen HOW to Turn on the PowerSole. Note It may take Check for firmware updates HOW to SET UP the CONSOLE Connect to your wireless network Register your product Calibrate the incline systemHOW to USE the Manual Mode May damage the treadmill when you fold it to When you are finished exercising, removeAdjust the incline of the treadmill to zero per Power cord. Important If you do not doSelect an onboard workout HOW to USE AN Onboard WorkoutStart the workout HOW to USE a SET-A-GOAL Workout Select the main menu. See on Select a set-a-goal workoutHOW to USE AN Ifit Live Workout Start the workout. See onHOW to USE the Equipment Settings Mode HOW to USE the Maintenance Mode Set up and manage a wireless network connection HOW to USE the Wireless Network ModeEnable Wi-Fi Exit the wireless network modeHOW to USE the Internet Browser HOW to USE the Stereo Sound SystemHOW to Adjust the Cushioning System HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Lower the Treadmill for USESymptom The power does not turn on TroubleshootingSymptom The power turns off during use Symptom The walking belt slows when walked on Symptom The buttons on the screen do not work correctly Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart List Key No. Qty DescriptionQty Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT
Top Page Image Contents