Epic Fitness TL 2710 manual Symptom The buttons on the screen do not work correctly

Page 28

SYMPTOM: The walking belt is off-center or slips when walked on

a.If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left idler roller screw clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the left idler roller screw counterclock- wise 1/2 of a turn. Be careful not to overtighten the walking belt. Then, plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is centered.

a

b.If the walking belt slips when walked on, first re- move the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller screws clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each edge of the walking belt 2 to 3 in. (5 to 7 cm) off the walking platform. Be careful to keep the walk- ing belt centered. Then, plug in the power cord, insert the key, and carefully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

b

SYMPTOM: The iFit Live mode does not function correctly

a.If the iFit Live mode is not functioning correctly, make sure that the treadmill has the most current firmware available (see step 3 on page 22).

SYMPTOM: The treadmill will not connect to the wireless network

a.Make sure that the wireless settings on your con- sole are correct (see step 4 on page 23).

b.Make sure that the settings for your wireless net- work are correct.

c.If you still have questions, see the front cover of this manual.

SYMPTOM: The buttons on the screen do not work correctly

a.If the screen is not properly calibrated, it will be dif- ficult to touch the correct buttons on the screen. To calibrate the screen, see step 5 on page 22.

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents QUESTIONS? Model No. EPTL14211.0 Serial NoCall TOLL-FREE Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Important Precautions Page Before YOU Begin Part Identification Chart Make sure that the power cord is unplugged AssemblyTo prevent the treadmill from moving, tipping, or falling Page Page Console assembly in the same way Attach the Left Upright Sleeve not shown toRaise the Frame 67 to the position shown Operation AND ADJUSTMENT HOW to Plug in the Power CordFeatures of the Console DiagramConsole HOW to USE the Touch Screen HOW to Turn on the PowerSole. Note It may take HOW to SET UP the CONSOLE  Connect to your wireless network Register your productCheck for firmware updates Calibrate the incline systemHOW to USE the Manual Mode When you are finished exercising, remove Adjust the incline of the treadmill to zero perMay damage the treadmill when you fold it to Power cord. Important If you do not doSelect an onboard workout HOW to USE AN Onboard WorkoutStart the workout HOW to USE a SET-A-GOAL Workout Select the main menu. See on Select a set-a-goal workoutHOW to USE AN Ifit Live Workout Start the workout. See onHOW to USE the Equipment Settings Mode HOW to USE the Maintenance Mode HOW to USE the Wireless Network Mode Enable Wi-FiSet up and manage a wireless network connection Exit the wireless network modeHOW to USE the Internet Browser HOW to USE the Stereo Sound SystemHOW to Adjust the Cushioning System HOW to Fold and Move the Treadmill HOW to Fold the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USESymptom The power does not turn on TroubleshootingSymptom The power turns off during use Symptom The walking belt slows when walked on Symptom The buttons on the screen do not work correctly Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyPart List Key No. Qty DescriptionQty Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT
Top Page Image Contents