HOW TO USE THE MANUAL MODE
1.Insert the key into the console.
See HOW TO TURN ON THE POWER on page 14. Note: It may take a minute for the console to be ready for use.
2.Select the main menu.
When you turn on the power,
the main menu should ap-
pear after the
console boots up. Touch the home button in
the
corner of the screen to return to the main menu at any time.
3.Start the walking belt and adjust the speed.
Touch the Start button on the screen or press the Start button on the console to start the walking belt. You can also press the Manual button on the console, and then touch the Resume button on the screen. The walking belt will begin to move at 1 mph. As you exercise, change the speed of the walking belt as desired by pressing the Speed in- crease and decrease buttons. Each time you press one of the buttons, the speed setting will change by 0.1 mph; if you hold down the button, the speed setting will change in increments of 0.5 mph.
If you press one of the numbered Quick Speed but- tons, the walking belt will gradually change speed until it reaches the selected speed setting.
To stop the walking belt, press the Stop button. To restart the walking belt, press the Start button.
4.Change the incline of the treadmill as desired.
To change the incline of the treadmill, press the Incline increase and decrease buttons or one of the numbered Quick Incline buttons. Each time you press one of the buttons, the incline will gradually change until it reaches the selected incline setting.
Note: The first time you adjust the incline, you must first calibrate the incline system (see step 4 on page 22). For your safety, as you adjust the incline setting to negative levels, the maximum speed of the treadmill will decrease at set intervals.
5. Monitor your progress.
The console
offers sev- eral display modes. The display mode
that you select
will determine which workout
information is
shown. To select the desired display mode, simply flick or slide the screen (see page 14). You can also view additional information by touching the red boxes on the screen.
As you walk or run on the treadmill, the screen can show the following workout information:
•The incline level of the treadmill
•The elapsed time
•The time left (Note: The manual mode does not have a time left countdown.)
•The approximate number of calories you have burned
•The approximate number of calories burned per hour
•The distance that you have walked or run
•The number of vertical feet you have climbed
•The speed of the walking belt
•A track representing 1/4 mile (400 m)
•Your pace in minutes per mile
•Your current lap number
•Your heart rate (see step 6)
16