Epic Fitness TL 2710 manual HOW to USE the Equipment Settings Mode

Page 21

HOW TO USE THE EQUIPMENT SETTINGS MODE

The console features an equipment settings mode that allows you to select a language and the unit of measurement, to turn on and turn off the display demo mode, and to enable or disable the key.

1.Select the settings main menu.

Insert the key into the console (see HOW TO TURN ON THE POWER on page 14). Next, select the main menu (see step 2 on page 16). Then, touch the gears button near

the lower right corner of the screen to select the settings main menu.

2.Select the equipment settings mode.

In the settings main menu, touch the Equipment Settings button.

3.Select a language.

To select a language, touch the Language button and select the desired language. Then, touch the back button on the screen to return to the equip- ment settings mode. Note: This feature may not be enabled.

4.Select the unit of measurement.

Touch the US/Metric button to view the selected unit of measurement. Change the unit of measure- ment, if desired. Then, touch the back button on the screen.

5.Turn on or turn off the display demo mode.

The console features a display demo mode, de- signed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console will function normally when you plug in the power cord, press the power switch into the reset position, and insert the key into the console. However, when you remove the key, the screen will show a demo presentation.

To turn on or turn off the display demo mode, first touch the Demo Mode button. Next, touch the On checkbox or the Off checkbox. Then, touch the back button on the screen.

6.Enable or disable the key.

Note: This feature may not be enabled on your treadmill.

You can disable the key so that the treadmill does not require the use of the key if desired. Touch the Safety Key button. To disable the key, touch the Disable checkbox. CAUTION: Read the safety warning on the screen before disabling the key. To enable the key again, touch the Enable checkbox.

7.Enable or disable a passcode.

The console features a child safety passcode, de- signed to prevent unauthorized users from using the treadmill.

Touch the Passcode button. To enable a pass- code, touch the Enable checkbox. Then, enter a

4-digit passcode of your choice. Touch Save to use this passcode. Touch Cancel to return to the equip- ment settings mode and not use a passcode. To disable the passcode, touch the Disable checkbox.

Note: If a passcode is enabled, the console will regularly ask for you to enter the passcode. The console will remain locked until the correct pass- code is entered. IMPORTANT: If you forget your passcode, enter the following master passcode to unlock the console: 1985.

8.Exit the equipment settings mode.

To exit the equipment settings mode, touch the back button on the screen.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Model No. EPTL14211.0 Serial No QUESTIONS?Call TOLL-FREE Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Important Precautions Page Before YOU Begin Part Identification Chart Assembly Make sure that the power cord is unpluggedTo prevent the treadmill from moving, tipping, or falling Page Page Attach the Left Upright Sleeve not shown to Console assembly in the same wayRaise the Frame 67 to the position shown HOW to Plug in the Power Cord Operation AND ADJUSTMENTDiagram Features of the ConsoleConsole HOW to Turn on the Power HOW to USE the Touch ScreenSole. Note It may take Connect to your wireless network Register your product HOW to SET UP the CONSOLE Check for firmware updates Calibrate the incline systemHOW to USE the Manual Mode Adjust the incline of the treadmill to zero per When you are finished exercising, removeMay damage the treadmill when you fold it to Power cord. Important If you do not doHOW to USE AN Onboard Workout Select an onboard workoutStart the workout Select the main menu. See on Select a set-a-goal workout HOW to USE a SET-A-GOAL WorkoutStart the workout. See on HOW to USE AN Ifit Live WorkoutHOW to USE the Equipment Settings Mode HOW to USE the Maintenance Mode Enable Wi-Fi HOW to USE the Wireless Network ModeSet up and manage a wireless network connection Exit the wireless network modeHOW to USE the Stereo Sound System HOW to USE the Internet BrowserHOW to Adjust the Cushioning System HOW to Fold the Treadmill HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USETroubleshooting Symptom The power does not turn onSymptom The power turns off during use Symptom The walking belt slows when walked on Symptom The buttons on the screen do not work correctly Exercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencyKey No. Qty Description Part ListQty Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT
Top Page Image Contents