Epic Fitness TL 2710 manual

Page 8

2.Identify the Right Upright (92), which is marked with a “Right” sticker.

Have a second person hold the Right Upright

(92)near the Right Base Cover (102). See the inset drawing. Tie the wire tie in the lower end of the Right Upright securely around the end of the Upright Wire (93). Then, pull the other end of the wire tie in the top of the Right Upright until the Upright Wire is routed through the Right Upright.

Gently pull up on the Upright Wire (93) as you set the Right Upright (92) on the Base (103) in- side the Right Base Cover (102). Be careful not to pinch the Upright Wire.

Attach the Right Upright (92) to the Base (103) with two 3/8" x 3 3/4" Screws (5) and two 3/8" Star Washers (6). Note: It may be necessary to tip the top of the Right Upright forward slightly as you thread the Screws into it. Do not tighten the Screws yet.

Attach the Left Upright (91) in the same way. Note: There are no wires on the left side.

2

Wire

Tie

93 91

92

102

		103
		6
	92	5
	92	93
		93
		Wire
		Tie

	3. With the help of a second person, lower the	3
	treadmill off the cardboard stand. The stand will	3
	treadmill off the cardboard stand. The stand will
	be used again in assembly step 9.	89
		89
	Identify the Right Upright Sleeve (90) and the	91
	Identify the Right Upright Sleeve (90) and the	"Left"	"Right"
	Left Upright Sleeve (89), which are labeled	"Left"	"Right"
	“Right” and “Left.”		90
			90
	Slide the Right Upright Sleeve (90) onto the
	Right Upright (92), and slide the Left Upright
	Sleeve (89) onto the Left Upright (91).		92
			Cardboard
			Stand
		8

Image 8

Contents QUESTIONS? Model No. EPTL14211.0 Serial NoCall TOLL-FREE Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Important Precautions Page Before YOU Begin Part Identification Chart To prevent the treadmill from moving, tipping, or falling AssemblyMake sure that the power cord is unplugged Page Page Console assembly in the same way Attach the Left Upright Sleeve not shown toRaise the Frame 67 to the position shown Operation AND ADJUSTMENT HOW to Plug in the Power CordConsole DiagramFeatures of the Console Sole. Note It may take HOW to Turn on the PowerHOW to USE the Touch Screen HOW to SET UP the CONSOLE Connect to your wireless network Register your productCheck for firmware updates Calibrate the incline systemHOW to USE the Manual Mode When you are finished exercising, remove Adjust the incline of the treadmill to zero perMay damage the treadmill when you fold it to Power cord. Important If you do not doStart the workout HOW to USE AN Onboard WorkoutSelect an onboard workout HOW to USE a SET-A-GOAL Workout Select the main menu. See on Select a set-a-goal workoutHOW to USE AN Ifit Live Workout Start the workout. See onHOW to USE the Equipment Settings Mode HOW to USE the Maintenance Mode HOW to USE the Wireless Network Mode Enable Wi-FiSet up and manage a wireless network connection Exit the wireless network modeHOW to Adjust the Cushioning System HOW to USE the Stereo Sound SystemHOW to USE the Internet Browser HOW to Fold and Move the Treadmill HOW to Fold the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USESymptom The power turns off during use TroubleshootingSymptom The power does not turn on Symptom The walking belt slows when walked on Symptom The buttons on the screen do not work correctly Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyPart List Key No. Qty DescriptionQty Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty