Epic Fitness TL 2710 manual Assembly, Make sure that the power cord is unplugged

Page 7

ASSEMBLY

•To hire a service technician to assemble this prod- uct in your home, call 1-800-445-2480.

•Assembly requires two persons.

•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps.

•The underside of the walking belt is coated with high-performance lubricant. After shipping, there may be some lubricant on top of the walking belt or on the shipping carton. This is normal. If there is lubricant on top of the walking belt, wipe it off with a soft cloth and a mild, non-abrasive cleaner.

•To identify small parts, see page 6.

•Assembly requires the following tools:

the included hex keys

one adjustable wrench

one Phillips screwdriver

To avoid damaging parts, do not use power tools.

1.Make sure that the power cord is unplugged.

With the help of a second person, raise the front of the treadmill and insert the crossbar on the Base (103) into the cutout in the cardboard stand as shown. Have the second person hold the treadmill until assembly step 3 to prevent it from moving forward or backward.

WARNING: Serious in- jury may occur if the treadmill moves forward or backward and falls off the cardboard stand. A second person must hold the treadmill until assembly step

3 to prevent the treadmill from moving, tipping, or falling.

1

103

Cardboard

Stand

7

Image 7

Contents Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT QUESTIONS?Model No. EPTL14211.0 Serial No Call TOLL-FREETable of Contents Important Precautions Page Before YOU Begin Part Identification Chart Make sure that the power cord is unplugged AssemblyTo prevent the treadmill from moving, tipping, or falling Page Page Attach the Left Upright Sleeve not shown to Console assembly in the same wayRaise the Frame 67 to the position shown HOW to Plug in the Power Cord Operation AND ADJUSTMENTFeatures of the Console DiagramConsole HOW to USE the Touch Screen HOW to Turn on the PowerSole. Note It may take Calibrate the incline system HOW to SET UP the CONSOLE Connect to your wireless network Register your product Check for firmware updatesHOW to USE the Manual Mode Power cord. Important If you do not do When you are finished exercising, removeAdjust the incline of the treadmill to zero per May damage the treadmill when you fold it toSelect an onboard workout HOW to USE AN Onboard WorkoutStart the workout Select the main menu. See on Select a set-a-goal workout HOW to USE a SET-A-GOAL WorkoutStart the workout. See on HOW to USE AN Ifit Live WorkoutHOW to USE the Equipment Settings Mode HOW to USE the Maintenance Mode Exit the wireless network mode HOW to USE the Wireless Network ModeEnable Wi-Fi Set up and manage a wireless network connectionHOW to USE the Internet Browser HOW to USE the Stereo Sound SystemHOW to Adjust the Cushioning System HOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Move the TreadmillSymptom The power does not turn on TroubleshootingSymptom The power turns off during use Symptom The walking belt slows when walked on Symptom The buttons on the screen do not work correctly Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Description Part ListQty Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT