Gold's Gym CWTL05607 manual Measure your heart rate if desired, Turn on the fan if desired

Page 15

The right side of the dis-

play will show the ap- proximate number of calories you have burned while walking or

running, the speed of the

walking belt, and your pace in minutes per mile. The right side of the display will also show your heart rate when you use the handgrip pulse sensor or the optional chest pulse sensor.

To reset the display, press the Stop button, remove the key, and then reinsert the key.

6.Measure your heart rate if desired.

Note: If you use the handgrip pulse sensor and the optional chest pulse sensor at the same time, the console will not display your heart rate accurately. See page 21 for information on the optional chest pulse sensor.

Before using

 

the handgrip

 

pulse sen-

 

sor, remove

 

the sheets of

 

clear plastic

Contacts

from the

 

metal con-

 

tacts. In ad-

dition, make sure that your hands are clean.

To measure your heart rate, stand on the foot rails and hold the metal contacts on the handrail— avoid moving your hands. When your pulse is de- tected, one or two dashes will appear in the right side of the display and then your heart rate will be shown. For the most accurate heart rate read- ing, continue to hold the contacts for about 15 seconds.

7.Turn on the fan if desired.

The fan features low and high speed settings. Press the Fan button repeatedly to select a fan speed or to turn off the fan. Note: If the fan is on when the walking belt is stopped, the fan will turn off automatically after a few minutes.

8.When you are finished exercising, remove the key from the console.

Step onto the foot rails, press the Stop button, and adjust the incline of the treadmill to the lowest setting. The incline must be at the lowest setting when you fold the treadmill to the storage posi- tion, or you may damage the treadmill. Next, re- move the key from the console and put it in a secure place.

When you are finished using the treadmill, switch the reset/off circuit breaker to the “off” position and unplug the power cord. IMPORTANT: If you do not do this, the treadmill’s electrical compo- nents may wear prematurely

15

Image 15
Contents QUESTIONS? Model No. CWTL05607.1 Serial NoCall TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin Assembly Tighten the Bolts yet Be careful not to pinch the Upright WireSole MAY be Damaged When Not Connected PROPERLY, the CONTop View To overtighten the BoltsPage Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Features of the Console Console DiagramInsert the key into the console HOW to Turn on the PowerHOW to USE the Manual Mode Select the manual modeFollow your progress with the display Change the incline of the treadmill as desiredTurn on the fan if desired Measure your heart rate if desiredHOW to USE a Cross Trainer Workout Select one of the six cross trainer workoutsPress the Start button to start the workout Continue the cross trainer workout Perform the first strength exercise when promptedSelect a distance workout HOW to USE a Distance WorkoutHOW to USE a Preset Workout Information Mode Optional Chest Pulse Sensor HOW to Adjust the Cushioning SystemHOW to USE the Upper Body Arms HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingTop Problem The walking belt slows when walked onPage Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Qty Description R0108ADescription Exploded Drawing A-Model No. CWTL05607.1 R0108A Exploded Drawing B-Model No. CWTL05607.1 R0108A Exploded Drawing C-Model No. CWTL05607.1 R0108A Exploded Drawing D-Model No. CWTL05607.1 R0108A Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT