TRANSPORT AND STORAGE ::
Please follow these instructions when carrying and moving the cycle about, because lifting it incorrectly may strain your back or risk other accidents:
NOTE! Always switch the power off and unplug the power cord before you start moving the device around!
::Stand behind the device.
::Grip the seat with one hand and the handlebar with the other, and set your foot on the rear support.
::Tilt the device so that it rests on its transport wheels.
::Wheel the device to move it, on these transport wheels.
::Lower the device while holding on to the handlebar and remain behind the device all the time.
NOTE! If the device is not used for a period of time, the transmission belt may become temporarily distorted. This can lead to a sensation of slightly uneven pedalling. However, after a few minutes of use the effect disappears as the belt returns to its original form.
To prevent the device malfunctioning, store in a dry place with as little temperature variation as possible and protected from dust.
MAINTENANCE ::
The T4 and T6 require very little maintenance. Check, however, from time-
::After exercising, clean the equipment with a soft, absorbent cloth. Do not use solvents. Sweat may cause corrosion: we recommend therefore that you protect all metal surfaces outside the plastic covers with teflon or car wax.
::Never remove the equipment’s protective casing.
::The electromagnetic brake forms an extremely powerful magnetic field that may damage the mechanism of a watch, or the magnetic identification strip on a credit or cash card, should they come into immediate contact with the magnets. Never attempt to detach or remove the electromagnetic brake!
10 ::