NordicTrack NTCW90907.0 user manual Avoid pinching, Wires during

7. Apply a small amount of grease to the axle of	7
the left Pedal Arm Bracket (43). Attach the left
Pedal Leg (8) to the left Pedal Arm Bracket with
two M8 x 45mm Button Bolts (70) and two M8	Grease
Nylon Locknuts (63).
Attach the right Pedal Leg (8) in the same		70	8
way.	43
		8
		63
8. Tip: Avoid pinching the Upper Wire Harness	8
(81) during this step. Attach the Handlebar
	96	96	81
(90) to the Upright (2) with four M6 x 32mm
Patch Screws (96).			2
	90

9. While a second person holds the Console (3)	9
near the Upright (2), connect the three wires on
		3
the console to the Upper Wire Harness (81), to
the Pulse Wire (92), and to the Ground Wire	Avoid pinching	Wires
(97). Insert the excess wire into the Upright.	the wires during
Tip: Avoid pinching the wires during this	this step	81
		2
step. See the inset drawing. Attach the
Console (3) to the Upright (2) with four M4 x
16mm Round Head Screws (95).		92
	3
		97
		2
		95
	9