NordicTrack NTEL7906.1 user manual Attach the Right Link Arm 31 in the same way

Page 10

10.Attach the Left Link Arm (30) to the Left Pedal Arm (32) with an M8 x 15mm Button Screw (106), an M8.5 x 16mm x 1.5mm Washer (103), and an Axle Cover (66).

Attach the Left Link Arm (30) to the left Upper Body Leg (24) with an M8 x 25mm Button Screw (110), two M8.5 x 16mm x 1.5mm Washers (103), two Axle Covers (66), a Link Arm Spacer (74), and an M8 x 15mm Button Screw (106) as shown.

Attach the Right Link Arm (31) in the same way.

10
24		106	31
10366 74		106	31
10366 74	66103
110
30
106	103	66	32
			32

11.Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical exerciser.

Plug the power cord into the power socket at the rear of the elliptical exerciser (see HOW TO PLUG IN THE POWER CORD on page 11). IMPORTANT: If the ellipical exerciser has been exposed to cold tempera- tures, allow it to warm to room temperature before plugging in the power cord. If you do not do this, the console displays or other electronic components may become damaged.

10

Image 10

Contents QUESTIONS? Model No. NTEL7906.1 Serial NoTable of Contents Important Precautions Rear Before YOU BeginFront Right SideAssembly Page Way See the inset drawing. Lift the Pedal ArmBe careful not Frame 1 be careful not to damage the WireWire Harnesses 64, 65 during This step Attach the Right Upper Body Arm 23 Same wayRepeat this step with the Right Link Arm Attach the Right Link Arm 31 in the same way HOW to Plug in the Power Cord HOW to USE the Elliptical ExerciserHOW to Fold and Unfold the Elliptical Exerciser HOW to Move the Elliptical Exerciser HOW to Exercise on the Elliptical ExerciserConsole Diagram Features of the Console Select the manual mode HOW to USE the Manual ModeFollow your progress with the display Turn on the fan if desired Turn on the console HOW to USE a Preset ProgramSelect a preset program Begin pedaling to start the programMeasure your heart rate if desired HOW to Create a Custom ProgramTurn on the console. See on Select a custom program HOW to USE a Custom Program Change the program if desiredEnter a target heart rate setting HOW to USE a Heart Rate ProgramTurn on the console. See on Select a heart rate program Turn on the fan if desired HOW to USE AN Ifit Program HOW to USE the Stereo Sound SystemHOW to Eliminate Rubbing of the Discs Maintenance and TroubleshootingHOW to Adjust the Belt Workout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencyKey No. Qty Description Key No. QtyQty Description R0407A Exploded Drawing B-Model No. NTEL7906.1 Ordering Replacement Parts Limited Warranty