NordicTrack 30510.0 user manual

Page 7

5.While another person holds the Upright (3), connect the Upper Wire Harness (48) to the Lower Wire Harness (49). Gently pull the upper end of the Upper Wire Harness to remove any slack, and insert the Upright into the Base (1). Attach the Upright with an M8 x 69mm Button Bolt (80), an M8 Split Washer (90), and an M8 Jamnut (79). Do not tighten the Button Bolt yet; make sure that the Jamnut is in the hexagonal hole in the Base.

Next, tighten two M8 x 23mm Button Screws (84) with M8 Split Washers (90) into the Base (1). Do not tight- en the Button Screws yet.

Attach the Water Bottle Holder (22) to the Base (1) with two M4 x 14mm Screws (104).

6.Insert the end of the Upper Wire Harness (48) through the rectangular hole in the Console Bracket (4). Attach the Console Bracket to the Upright (3) with four M6 x 20mm Button Screws (77).

Orient one of the Upright Covers (17) as shown, and hold it against the Upright (3). Attach the Upright Cover with two M4 x 16mm Round Head Screws (101). Attach the other Upright Cover in the same way.

7.The Console (5) requires four 1.5V “D” batteries (not included); alkaline batteries are recommended. Press the two tabs on the battery cover, and remove the bat- tery cover. Next, insert four batteries into the Console.

Make sure that the batteries are oriented as shown by the diagrams inside of the battery compart- ments. Then, reattach the battery cover to the Console.

8.While another person holds the Console (5) near the Console Bracket (4), connect the wire harness on the Console to the Upper Wire Harness (48). Insert the excess wire harness into the Upright (3). Next, attach the Console to the Console Bracket with four M4 x 16mm Round Head Screws (101). Be careful to avoid pinching the wire harness.

7

5

 

 

 

 

3

 

 

 

48

 

 

80

49

 

 

90

79

90

 

 

 

 

 

 

 

84

 

90

 

104

84

 

 

 

22

 

 

1

 

6

 

 

 

 

 

4

 

77

 

 

 

77

48

 

 

 

 

 

 

3

 

101

 

 

 

17

 

17

 

 

101

 

 

 

7

 

 

 

 

 

 

Tabs

5

 

 

 

 

Batteries

Battery

 

Cover

 

 

 

8

4

 

 

101

 

 

 

 

 

 

48

 

 

 

Wire

 

5

 

 

 

3

Harness

 

 

 

 

Image 7
Contents Model No Serial No QUESTIONS?Table of Contents Important Precautions Before YOU Begin Assembly Page Page Page Page HOW to Level the Elliptical Exerciser HOW to USE the Elliptical ExerciserHOW to Fold and Unfold the Elliptical Exerciser HOW to Move the Elliptical ExerciserHOW to Exercise on the Elliptical Exerciser Features of the Console Center of the display-When HOW to USE the Manual ModeMonitor your progress with the display Left side of the display-The left sideSheets of plastic on When you are finished exercising, the consoleMeasure your heart rate if desired If there are thinBegin pedaling to start the program HOW to USE a Calorie Goal ProgramHOW to USE a Pulse Control Program Select one of the calorie goal programsHold the handgrip pulse sensor Select one of the resistance & rpm programs HOW to USE the Distance ProgramHOW to USE a Resistance & RPM Program Select the distance programMeasure your heart rate if desired Audio Cable HOW to Connect Your Portable StereoHOW to Connect Your Home Stereo HOW to Connect Your Computer PressVCR. the Play button on your CD player or HOW to Connect Your VCRRCA AdapterFollow the on-line instructions to start Program Measure your heart rate as desiredReturn to the elliptical exerciser and begin Pedaling Battery Replacement Maintenance and TroubleshootingHandgrip Pulse Sensor Troubleshooting Exercise Frequency Conditioning GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Description Part LIST-Model NoR0805A Exploded Drawing B-Model No Limited Warranty HOW to Order Replacement Parts