ParaBody 400101 manual 38 3/8 X 2-3/4

Page 11

•All FLANGE SPACERS & LOCKNUTS are 3/8” FLANGE SPACERS (66) & 3/8” LOCKNUTS (48).

7

66

48

FIGURE 13

79

38 3/8 X 2-3/4”

92

STEP 13

•Route the threaded end of LAT CABLE (92) through the TOP BOOM (7) as shown in FIGURE 13.

•Loosely assemble four 3-1/2” PULLEYS (79) to the slots in TOP BOOM (7) using four 3/8 X 2-3/4” BOLTS (38), eight 3/8” FLANGE SPACERS (66), and four 3/8” LOCKNUTS (48) as shown in FIGURE 13. (NOTE: Make sure the cable is routed under all the pulleys.)

STEP 14

47

 

• Snap two WEIGHT PLATE BUSHINGS (47) each,

74

into the PARABODY side of fifteen WEIGHT

PLATES (74) as shown in FIGURE 14.

 

FIGURE 14

 

1/2

 

1/2

 

1/2

 

1/2

 

1/2

 

 

1/2

0

1

2

3

4

5

6

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Home GYM Important Notes Parts List Step 50 1/2 LOW Height X 3-3/4 42 1/2 X X 3-3/4 42 1/2 X LOW Height TAB Detail Locknuts 38 3/8 X 2-3/4 Silicon or teflon spray available at most hard Ware stores Tighten 37 3/8 X Roller PAD 32 with rubbing alcohol or water. Also Step 50 1/2 LOW HT X 2-3/4 35 3/8 X Assemble one 3-1/2 Pulley 79 to the Floating Pulley Cable Guide Step Step Step 36 3/8 X 1-3/4 See Detail Cableadjustment Step
Top Page Image Contents