ParaBody 400101 manual Step

Page 22

STEP 30

•Loop LEG EXT. CABLE (90), previously installed in BASE

(10), around pulley in lower FLOATING PULLEY BRACKET (22) as shown in FIGURE 30.

22

90

FIGURE 30

22

 

48

 

79

 

90

 

36

3/8 X 1-3/4”

FIGURE 31

 

STEP 31

•Assemble one 3-1/2” PULLEY (79) around the LEG EXT. CABLE (90) and to the upper FLOATING PULLEY BRACKET (22) using one 3/8 X 1-3/4” BOLT (36) and one 3/8” LOCKNUT (48) as shown in FIGURE 31.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Home GYM Important Notes Parts List Step 50 1/2 LOW Height X 3-3/4 42 1/2 X X 3-3/4 42 1/2 X LOW Height TAB Detail Locknuts 38 3/8 X 2-3/4 Silicon or teflon spray available at most hard Ware stores Tighten 37 3/8 X Roller PAD 32 with rubbing alcohol or water. Also Step 50 1/2 LOW HT X 2-3/4 35 3/8 X Assemble one 3-1/2 Pulley 79 to the Floating Pulley Cable Guide Step Step Step 36 3/8 X 1-3/4 See Detail Cableadjustment Step
Top Page Image Contents