ParaBody 400101 manual Assemble one 3-1/2 Pulley 79 to the Floating Pulley

	4
	34
	31
73	FIGURE 26

STEP 26

•Assemble four ROLLER PADS (31) to the LEG CURL/EXTENSION (4) as shown on FIGURE 26 using two 16” TUBES (34) and four STARLOCK COLLARS (73).

•Assemble two ROLLER PAD (31) to the bushing on the BENCH FRAME (15) as shown on FIGURE 26 using one 16” TUBE (34) and two STARLOCK COLLAR (73).

		48	STEP 27
		79	• Assemble one 3-1/2” PULLEY (79) to the FLOATING PULLEY
	22		BRACKET (22) using one 3/8 X 1-3/4” BOLT (36) and one 3/8”
			LOCKNUT (48) as shown in FIGURE 27.
36 3/8 X 1-3/4”
FIGURE 27
1/2	1/2	1/2	3	1/2	1/2	1/2
0	1	2		4	5	6
			19