and valleys. The computerized interval training workout has been scientifically demonstrated to promote greater
The HILL workout goes through four phases, each marked by different intensity levels. The WORKOUT PROFILE window displays the progress of these phases. As noted in the descriptions below, the heart rate should be measured at two stages in the workout to gauge its effectiveness. Grasp the sensors (C9I only), or wear the chest strap.
1
2Plateau increases the intensity slightly, and keeps it steady, to bring the heart rate to the low end of the target zone. Check the heart rate at the end of this phase.
3Interval Training is a series of increasingly steeper hills, alternating with valleys, or stints of recovery. The heart rate should rise to the high end of the target zone. Check the heart rate at the end of this phase.
4
TERRAIN (HILLS AND VALLEYS)
PLATEAU |
| INTERVAL TRAINING |
| ||
|
|
|
|
|
|
| FIRST HR |
| SECOND HR | ||
| CHECK POINT |
| CHECK POINT |
Each column, as seen in the WORKOUT PROFILE WINDOW and the chart above, represents one interval. The overall duration of the workout determines the length of each interval.
1 to 9 minutes: A workout with a duration of less than 10 minutes is insufficient for the Hill program to complete all four phases adequately. The program, therefore, condenses a workout of this duration at various stages.
10 to 19 minutes: The interval durations initially are set at 30 seconds for a
20 to 99 minutes: All intervals last 60 seconds. If the user adds minutes to the previously set duration while the workout is in progress, the program adds hills and valleys that are identical to the first eight intervals of the Interval Training phase. This pattern repeats until the workout is completed.
RANDOM
The RANDOM program creates a terrain of hills and valleys that varies with each workout. More than one million different patterns are possible.
MANUAL
The MANUAL program sets an intensity level that does not change automatically. While the workout is in progress, increase or lower the intensity level as desired, using the arrow keys.
19