Horizon Fitness EX-65, EX-55, EX-75 manual S E M B Ly C O N T I N U E D

INTRODUCTION IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE

YOU BEGIN

ELLIPTICAL

OPERATION

CONDITIONING TROUBLESHOOTING LIMITED

GUIDELINES & MAINTENANCE WARRANTY



A S S E M B LY STEP 2
BOLT (A)	CONSOLE MAST
SPRING WASHER (B)
FLAT WASHER (C)	CONSOLE
	MAST
	BOOT
	CONSOLE WIRES
MAIN FRAME

A)Open HARDWARE BAG FOR STEP 2.

B)Carefully pull the CONSOLE WIRES through the CONSOLE MAST using the twist tie located inside the

CONSOLE MAST.

C)Attach the CONSOLE MAST to the MAIN FRAME using 4 BOLTS (A), 4 SPRING WASHERS (B) and 4 FLAT WASHERS (C).

HARDWARE BAG FOR STEP 2 CONTENTS :
BOLT (A)	SPRING WASHER (B)	FLAT WASHER (C)
20 mm	18 mm	20 mm
Qty: 4	Qty: 4	Qty: 4
	SCREW (K)
EX-65 & EX-75 ONLY:	10 mm
	Qty: 2

A S S E M B LY STEP 2 ( C O N T I N U E D )
	EX-55 ONLY
	TOP BACK COVER
	CONSOLE	TOP FRONT COVER
	MAST
SCREWS (K)	BOOT
ACCESSORY TRAY
(EX-65, EX-75)
MAIN FRAME	TOP SIDE COVERS
	(EX-65, EX-75)

D)Insert the left TOP SIDE COVER, followed by the right TOP SIDE COVER and snap them together.

E)Insert ACCESSORY TRAY and secure it using 2 SCREWS (K) as shown (EX-65, EX-75 only).

F)Slide CONSOLE MAST BOOT down to seal the console mast hole.



IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

ELLIPTICAL OPERATION

LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES

HZ_Ellipticals_Rev.1.5.indd 8-9 8/15/06 2:35:43 PM