Image 831.100430 Assembly, Before beginning assembly, carefully read, Buckle Slot, Flap

Page 8

ASSEMBLY

Before beginning assembly, carefully read the

•

Assembly requires the included air pump.

following information and instructions:

 

 

 

•

Read each assembly step before you begin.

• Place all parts in a cleared area and remove the

 

 

packing materials; do not dispose of the packing

• During assembly, make sure that all parts are ori-

materials until assembly is completed.

 

ented as shown in the drawings.

• Assembly requires two people.

1.Before beginning assembly, be sure that you have read and understand the information in the box above and on the previous page.

Unfold the pre-assembled Fabric Spa Surround (8) and Side Panels (1, 2) until the assembled unit is round.

Check the self-attaching connections between the Fabric Spa Surround (8) and Side Panels (1, 2) to be sure that all connections are firm. Be sure that all six cover buckles are fully inserted through the slots in the Side Panels (1, 2).

2.Unfold the Inflatable Spa Liner (9).

Attach the nozzle on the included air pump to the

valve on the side of the Inflatable Spa Liner (9). Use the air pump to fill the sides of the Inflatable Spa Liner with air.

Attach the nozzle on the air pump to the valve on

the floor of the Inflatable Spa Liner (9). Use the air pump to fill the bottom of the Inflatable Spa Liner with air.

Attach the nozzle on the air pump to the valve on

top of the Inflatable Spa Liner (9). Use the air pump to fill the cushion on top of the Inflatable Spa Liner with air.

3.Be sure that the flap on the Fabric Spa Surround (8)

is on the outside of the Fabric Spa Surround and

Side Panels (1, 2). Insert the Inflatable Spa Liner (9) into the Fabric Spa Surround. Align the valve in the Inflatable Spa Liner with the hole in the Fabric Spa Surround and the Inflation Side Panel (2).

Flip the flap on the Fabric Spa Surround (8) over the low section of the Inflatable Spa Liner (9).

1

8

Buckle

1, 2

Slot

2

Inflate here second

9

Inflate here third

Inflate here first

3

9

8—Flap

1, 2

Valve must be visible in this hole

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents QUESTIONS? Model No Serial NoCustomer HOT Line Sears CANADA, INC., TORONTO, Ontario M5B 2B8Table of Contents Water pump in the spa jet unit must be Important Safety InstructionsUse the Renew 900 only as described in this manual Contact a physician Keep pets away from the Renew 900 at all timesHol or drugs can cause unconsciousness Image Before YOU Begin If you set up the Renew 900 inside If you set up the Renew 900 outsideChoosing a Location for the Renew Do not use an extension cord with the RenewAssembly Before beginning assembly, carefully readFollowing information and instructions Buckle SlotBuckle Latches and BucklesUsing the Renew Testing and Treating the WaterPriming the SPA JET Unit Plugging in the RenewDiagram of the Console Using the Console Securing the SPA CoverLatch Buckle Key JetDraining the Pump SPA JET Unit OperationDraining the Renew Maintenance Symptom the SPA will not Operate Symptom the Pump HumsSymptom the Water does not Heat Symptom the Water Pulsates or There is Minimum Water FlowSymptom the SPA JET Unit Continues Power cord must be unpluggedSymptom the Water Level Drops Care onOrdering Replacement Parts Model Number of the product Name of the product ImageCustomer Record Model No Serial NoDate De l’Industrie St-Jérôme, Québec Canada, J7Y 4B8Limited Five Year Massage SPA Warranty Product Warranty Registration’Achat ReferencesDu Modèle De Série Garantie Limitée DE Cinq ANS Formulaire DE Garantie DU ProduitPart LIST-Model No Key No. Qty DescriptionR0499A 100430
Top Page Image Contents