Gold's Gym GGTL04607.2, 550 manual Front View Side View View from Above

Page 10

9.While another person holds the Console Base (26) near the right Handrail (18), attach the ground wire on the Console Base to the right Handrail with a #8 x 1/2" Ground Screw (11).

Connect the wire harness on the Console Base (26) to the Upright Wire (28). See the inset drawing. The connectors should slide to- gether easily and snap into place. If they do not, turn one connector and try again. IF THE

CONNECTORS ARE NOT CONNECTED PROP- ERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON.

10. Insert the wires into the Console Base (26) as you set the Console Base on the Handrails. Be careful not to pinch the wires. Next, thread two 1/4" x 1/2" Bolts (22) with 1/4" Star Washers (21) into the Handrails and the Console Base; do not tighten the Bolts yet.

Attach the Console Base (26) to the Handrails (18) with four #8 x 3/4" Screws (2). Then, tighten the two 1/4" x 1/2" Bolts (22).

11. Lower the Uprights (31, 36).

See the inset drawing. Position the Uprights (31, 36) so that the Frame (74) is centered be- tween the Uprights.

Firmly tighten the 3/8" x 3" Bolts (32) and then tighten the 3/8" x 2 1/4" Bolts (40) on each side of the treadmill. Do not overtighten the 3/8" x 3" Bolts.

9

 

26

Wire

11

Ground

 

Wire

Harness

28

Wire

 

Harness

 

 

18

 

 

28

10

26

Front View

 

18

18

 

 

 

2

21

 

2

21

22

 

 

 

 

 

22

11

 

Side View

32

 

 

 

 

40

 

 

74

31, 36

 

 

 

 

 

31

View from Above

36

74

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents QUESTIONS? Model No. GGTL04607.2 Serial NoTable of Contents Use Important PrecautionsWhen connecting the power cord see Pulse sensor is not a medical devicePage Before YOU Begin Assembly Tighten the Bolts yet Fully tighten the Bolts yetDo not overtighten the Bolts the Wheels Should turn freely Outer side of the Frame Spacer facing See the far right drawing. Wrap the wire tieSee the left inset drawing. Identify the two Fully tighten the Bolt yetUpright Wire Front View Side View View from Above Make sure that no wires are pinched. Reattach HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleSelect the manual mode HOW to Turn on the PowerHOW to USE the Manual Mode Insert the key into the consoleFollow your progress with the display Measure your heart rate if desiredSelect one of the heart rate workouts Enter your weight if desired HOW to USE AN Event Training WorkoutSelect an event training workout. To select an Enter your weight HOW to USE a Weight Loss WorkoutSelect a weight loss workout. To select a HOW to USE a Classic Workout Select one of the classic workouts. To select oneHOW to USE the Stereo Sound System Information ModeOptional Chest Pulse Sensor HOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingCompatible with GFCI-equipped outlets Top View Problem The walking belt slows when walked onKey and Unplug the Power CORD. Using Walking belt has shifted to the right, turn the leftWorkout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Key No. Qty Description R0109AQty Description 426 Exploded Drawing B-Model No. GGTL04607.2 R0109A Exploded Drawing C-Model No. GGTL04607.2 R0109A Exploded Drawing D-Model No. GGTL04607.2 R0109A Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT

GGTL04607.2, 550 specifications

Gold's Gym has long been synonymous with fitness and strength training, and the Gold's Gym 550 (GGTL04607.2) continues this legacy by offering a versatile and feature-rich workout experience. This particular model is designed to cater to both novice and seasoned fitness enthusiasts, bringing a variety of workout options right into the home gym.

One of the standout features of the Gold's Gym 550 is its robust frame construction, which ensures stability and safety during even the most intense workouts. The equipment's solid build can support a wide range of exercises, providing users with the confidence to push their limits without fear of the equipment bending or breaking under pressure.

The Gold's Gym 550 comes equipped with a multi-position utility bench, allowing for a plethora of exercises ranging from bench presses to leg curls. This versatility is a significant selling point, as it enables users to target multiple muscle groups and switch between workouts seamlessly. Additionally, the adjustable bench can be set to various angles, providing optimal positioning for different exercises, maximizing effectiveness while minimizing the risk of injury.

One of the highlights of the GGTL04607.2 is its innovative resistance technology. Utilizing a system of resistance bands and pulleys, users can customize their workout intensity without the need for bulky weights. This not only makes it user-friendly but also enhances safety by eliminating the risk of dropping weights.

The design also includes additional features aimed at enhancing user experience. Ergonomic grips on the handles provide comfort during workouts, while built-in storage for accessories ensures that the area remains clutter-free. The foldable design of the Gold's Gym 550 allows for easy storage and transport, making it ideal for those with limited space.

Moreover, the equipment includes a digital training guide to help users get started and stay motivated. This guide features various workout routines tailored to different fitness levels, ensuring that everyone can find a suitable program to adhere to.

In conclusion, the Gold's Gym 550 (GGTL04607.2) is a remarkable piece of fitness equipment that combines durability, versatility, and advanced technology to meet the needs of a diverse clientele. Whether you're looking to build muscle, improve endurance, or maintain overall health, this gym equipment is an excellent addition to any home gym setup.
Top Page Image Contents